Facility Requirements

Power

60Hz only, system does not operate at 50Hz

115 ±10% VAC, 60 Hz 15 amp, 1phase

230 ±10% VAC, 60 Hz 10 amp, 1phase

Compressed Air

Clean, Dry Air (CDA)

Filtered to 5 micron particulate contamination.

Oil Content: <0.1 ppm, by weight, filtered to 0.01 micron oil contaminant.

Dew point: ambient to -40°C

Air Supply Pressure

5.6 to 7kg /cm2 (80 to 90 PSIG)

5.6 kg/cm (90 PSIG) nominal

Total Air Flow Rate Required

4 to 5 l/s (8-10 scfm)

4.5 l/s (9 scfm) nominal

Air Supply Temperature

+20° to +28°C; +23°C nominal

Operating Environment

Operating Temperature

+20° to +28°C; +23°C nominal

Humidity

0 to 60%; 45% nominal

Service and Safety

Refrigerants

HCFC and CFC-free, non-toxic, non-flammable

Serviceability

Auto-diagnostics and field replaceable modules

Over Temperature Protection

+230°C (factory set): Operator can set high and low air temperature limits

Weight and Dimensions

Dimensions

Controller

40.1cm (15.8 inches) WIDE x 14.8cm (5.8 inches) HIGH x 48.9cm (19.2 inches) DEEP

Thermal Wand

8cm (3 inches) DIAMETER, 36cm (14 inches) LONG

Stand

48.25cm (19 inches) approximately above benchtop to top of post

Reach from Vertical Post

standard, 51cm (20 inches)

Weight

Controller with Thermal Wand and Hose: 14.5 kg (32lbs.)

Thermal Wand Stand Assembly: 7kg (5.5 lbs.)

Thermal Cap: .45 kg (1lb.)

Noise Level

<70dBA