Rent Magnetic Field Test | Maxim Instruments Corporation

Featured Products

Magnetic Field Test

EM TEST ACS 500N2.3 Single Phase AC/DC Voltage Source 2 kVA

ACS 500N2.3 is a single phase AC/DC source specifically designed for test applications as per IEC 61000-4-16 in combination with the CWS 500N4 common-mode disturbance simulator. It also meets the requirements of IEC/EN 61000-3-2 and IEC/EN 61000-3-3.... View Details >>

EM TEST AMP 200N Low Frequency Signal Source 0 Hz – 250 kHz 250W

The AMP 200N has been designed as a low-frequency signal source to generate sinusoidal signals used to simulate ripple noise and ground shift noise as required by a variety of standards in the automotive industry e.g. as per Ford EMC-CS-2009.1, CI 21... View Details >>

EM TEST AMP 200N1 Low Frequency Signal Source 0 Hz – 250 kHz 800W

The AMP 200N1 has been designed as a low-frequency signal source to generate sinusoidal signals used to simulate ripple noise and ground shift noise as required by a variety of standards in the avionics, military and automotive industry. The AMP ... View Details >>

EM TEST CWS 500N1 Continuous Wave Simulator 80W

The CWS 500N1 is the most compact single box test equipment for testing conducted rf immunity as per IEC 61000-4-6 and related standards with a frequency range of 100kHz to 300MHz. Apart from the 1kHz 80% AM signal the CWS 500N1 also generates a 2 Hz... View Details >>

EM TEST CWS 500N2 Continuous Wave Simulator EN/IEC 61000-4-6

Bulk Current Injection (BCI) is a test procedure to proof the immunity to electrical disturbances by narrowband electromagnetic energy. The test signal is injected by means of a current injection probe physically being a current transformer laid arou... View Details >>

EM TEST CWS 500N3 Continuous Wave Simulator 10 Hz – 250 kHz

The CWS 500N3 is the state-of-the-art solution in a compact single-box design to test the immunity to conducted low-frequency disturbances and low-frequency magnetic fields. The CWS 500N3 includes a LF signal generator and amplifier, a low-frequency ... View Details >>

Haefely MAG 100 Power Frequency Magnetic Field Test Equipment

To be used for EMC Tests requiring AC Magnetic Fields. MAG 100 has a 1m x 1m square, single turn antenna. A current of 120A is needed to feed the coil to produce a field of 100A/m. MAG 100 includes a current transformer capable of delivering 120A... View Details >>

Haefely MFS 100 Power Frequency & Pulse Magnetic Field Test System

The MFS 100 test system can be used to test power frequency magnetic fields according to IEC/EN 61000-4-8 and pulse magnetic field according to IEC/EN 61000-4-9. The MFS 100 is an accessory to either the PSURGE 4010, PSURGE 8000 with PIM 100 surge... View Details >>

Haefely MSURGE Magnetic Impulse Field Test System

To be used for EMC Tests requiring impulse Magnetic Fields. The MSURGE is an accessory to either the PSURGE 4010 or PSURGE 8000 with PIM 100 surge generators. It enables magnetic field testing up to 3000 A/m as required by IEC 61000-4-9. The su... View Details >>

Haefely PIM 155 100 kHz & 1 MHz Oscillating Magnetic Field Module

IEC 61000-4-10 describe an oscillating magnetic field generator. The oscillating magnetic field is used to test the immunity of electronic equipment to be installed in high voltage sub-stations. Safety is paramount when AC and impulse voltages are... View Details >>

Haefely PSURGE 30.2 Modular 30kV / 30kA Surge Test System

This test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge is characterized by high energy and relative fast front times. Pulse durations are widely variable as are the... View Details >>

Haefely PSURGE 8000 Surge Platform Test System

This system meets ALL your current and future Surge Testing requirements! A modular expandable system that grows with your application needs. The modular concept is built around a PC based host controller (the PSURGE 8000 Controller) with physica... View Details >>

TESEQ NSG 3040 Multi-Function Generator System 4 kV Solution

Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.... View Details >>

TESEQ NSG 3040-EFT Single Function Generator System 4.8 kV Solution

Teseq’s new NSG 3040-EFT is an easy-to-use single function generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN stan... View Details >>

TESEQ NSG 3060 Multi-Function Generator System 6 kV Solution

Teseq’s new NSG 3060 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.... View Details >>

Standards

CISPR

CISPR 11

CISPR 14 - 1

CISPR 14 - 2

CISPR 16 - 1

CISPR 16 - 2

CISPR 16 - 3

CISPR 16 - 4

CISPR 22

CISPR 24

IEC

IEC/TR EN 61000 - 1 - 1

IEC/TR EN 61000 - 2 - 1

IEC/TR EN 61000 - 2 - 3

IEC EN 61000 - 3 - 2

IEC EN 61000 - 3 - 4

IEC/TC EN 61000 - 3 - 5

IEC EN 61000 - 4 - 2

IEC EN 61000 - 4 - 3

IEC EN 61000 - 4 - 4

IEC EN 61000 - 4 - 5

IEC EN 61000 - 4 - 6

IEC EN 61000 - 4 - 7

IEC EN 61000 - 4 - 8

IEC EN 61000 - 4 - 9

IEC EN 61000 - 4 - 11

European

EN 50 081 part 1

EN 50 081 part 2

EN 55 011

EN 55 013

EN 55 014

EN 55 015

EN 55 020

EN 55 022

EN 55 024

EN 50 082 part 1

EN 50 082 part 2

EN 50 093

American

FCC Part 15

MIL-STD - 461E