Products
- Amplifier
- Analyzer
- Antenna
- Automotive EMC
- Cable Fault Locator
- Calibrator
- Chamber / Oven
- Coupling / Decoupling (CDN)
- Curve Tracer
- Data Acquisition
- Electronic Load
- EMC / EMI
- Environmental
- ESD Simulator
- Generator
- GTEM / TEM Cell
- Harmonics & Flicker
- Hipot
- LISN
- Mains Dips & Drops
- Meter
- Oscilloscope
- PIM Test Solution
- Power Supply
- RF Field Monitor System
- Thermostream
Featured Products
California Instruments MX135-3 High Output AC Power Source 135kVA
IFI T4026-50 High Power TWT Amplifier 26.5 GHz – 40 GHz 50W
IFI T2618-50 High Power TWT Amplifier 18 GHz – 26.5 GHz 50W
IFI TCCX2500 Tetrode Tube RF Amplifier 10 kHz – 220 MHz 2500W
California Instruments MX45-3 High Output AC Power Source 45kVA
IFI M406 Tetrode Tube RF Amplifier 10 kHz – 220 MHz 1000W
Tenney Benchmaster Test Chamber -73°C to 200°C
Description
Benchmaster Temperature and Humidity Test Chambers
Tenney's Benchmaster temperature and humidity test chambers are capable of simulating a wide range of temperature or temperature and humidity conditions. The five cubic foot work space will readily accept equipment as large as a 19"relay rack.
In keeping with the needs of today's lab, Tenney designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace.
Features
- Vapor-tight interior liners of 100% continuously welded stainless steel
- Humidity capable models constructed of 100% non-corroding parts and have a low-water protection system
- Open-air low mass nichrome wire heating elements
- Single stage or cascade refrigeration system with hermetic or semi-hermetic compressor
- Capillary tube type refrigerant control
- 100 Ohm Platinum RTD sensor for temperature measurement
- Vapor-Flo I Humidity Generator (in humidity models)
- Dry capacitance type humidity sensor
- Hi-lo pressure and oil pressure switches
- Chamber drain connection
- Propeller type fans or blower wheels for airflow
Controller – Watlow F4
- Single Channel
- Profiling: Forty Profiles, 256 Steps
- Automatic & Manual Control
- 1 Input: Universal Type (RTD is Std.)
- 4 Digital Inputs
- 2 Auxiliary Analog Inputs - Optional
- 2 Control Outputs: Time Proportioned, On/Off, or 4-20 ma
- 2 Alarm Outputs
- 8 Digital Event Outputs
- 2 Retransmit Outputs - Optional
- Communications: EIA-232 and EIA-485 with Modbus RTU protocol
Specifications
Overall dimensions in inches/mm |
|||||
Model |
BTC |
BTRC |
|||
Workspace |
W |
20/51 |
|||
D |
19.25/49 |
||||
H |
22/56 |
||||
Exterior |
W |
57/145 |
62/157 |
||
D |
34/86 |
||||
H |
34.5/88 |
||||
Low |
C |
-70 |
|||
High |
C |
+200 |
|||
Humidity Capability Utilities, etc |
20% to 95% RH in the dry bulb range of +20C to +85C as limited by a 3 dewpoint. |
||||
Refrigeration |
(2) 1 HP |
||||
Heater Capacity |
2 kW |
||||
Humidifier |
Watts |
|
750 |
||
GPH |
|
0.3 |
|||
Amps@230V / 1 Ph |
24 |
24 |
|||
Amps Fuse |
35 |
||||
Unit Weight |
LBS |
500 |
Standards
CISPR |
CISPR 11 |
CISPR 14 - 1 |
CISPR 14 - 2 |
CISPR 14 - 2 |
CISPR 16 - 1 |
CISPR 16 - 2 |
CISPR 16 - 3 |
CISPR 16 - 4 |
CISPR 22 |
CISPR 24 |
IEC |
IEC/TR EN 61000 - 1 - 1 |
IEC/TR EN 61000 - 2 - 1 |
IEC/TR EN 61000 - 2 - 3 |
IEC EN 61000 - 3 - 2 |
IEC EN 61000 - 3 - 4 |
IEC/TC EN 61000 - 3 - 5 |
IEC EN 61000 - 4 - 2 |
IEC EN 61000 - 4 - 3 |
IEC EN 61000 - 4 - 4 |
IEC EN 61000 - 4 - 5 |
IEC EN 61000 - 4 - 6 |
IEC EN 61000 - 4 - 7 |
IEC EN 61000 - 4 - 8 |
IEC EN 61000 - 4 - 9 |
IEC EN 61000 - 4 - 11 |
European |
EN 50 081 part 1 |
EN 50 081 part 2 |
EN 55 011 |
EN 55 013 |
EN 55 014 |
EN 55 015 |
EN 55 020 |
EN 55 022 |
EN 55 024 |
EN 50 082 part 1 |
EN 50 082 part 2 |
EN 50 093 |
American |
FCC Part 15 |
MIL-STD - 461E |