»  Categories   »      PIM Test Solution   »    PIM Analyzer   »    Analyzer  

image enlarge

Kaelus CIS-0001A Passive Intermodulation (PIM) Source

Description

Passive Intermodulation (PIM) Source * the Nominal PIM level for the PIM Source can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements within the same frequency band.

Features

  • Passive Intermodulation (PIM) test source
  • Repeatable high PIM level over wide frequency range
  • Used to verify PIM test equipment operation
  • Used to calibrate Range to Fault module for PIM testing
  • Rugged shock proof design
  • Heat shield for personal protection
  • Dust cover for prolonged life

Specifications

 Frequency Range

500MHz – 2300MHz

RF impedance

50 ohms

Return loss

18dB min

Nominal PIM level*

As per graph

RF power rating

10W, continuous | 50W, 3 mins

Connector

7/16 Male

Mating torque

Install slightly more than hand tight to the RF output port of the PIM Analyzer. Tightening with a 7/16 DIN torque wrench is not recommended.

Operating temperature range

-10° to +50° C

Dimensions (L x D)

190 x 60mm (7.48 x 2.36in)

Weight

0.5kg (1.0lb)

*The Nominal PIM level for the CIS-0001A can vary within the range shown. The Nominal PIM level will be repeatable within ± 3dB for subsequent PIM measurements at a specific frequency.

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E