EMCO'S LISN MODELS 3810/2 is a multi-line low pass filter networks used for conducted emissions measurement.
It is placed between the power mains and the EUT (Equipment Under Test) to stabilize line impedance, provide a 50 ohm RF connection, and eliminate unwanted RF signals from the line supply. In addition, LISNs can be used to predict radiated emissions for diagnostic and pre-compliance testing.
The Model 3810/2 is designed and tested in accordance with IEC Publication 1010, Safety Requirements for Electronic Measuring Apparatus. It has also received CSA safety certification from the Canadian standards Association, a further indication of ETS-EMCO's commitment to safety.
- 9 kHz to 30 MHz Frequency Range
- 10A or 16A Continuous Current Rating
- Earth Line Choke
- Artificial Hand Network
- High Pass Filter
- Choice of Plugs / Receptacles
- Manual or Remote Switched Test Ports
Electrical Specifications
|
Frequency Range
|
9 kHz - 30 MHz
|
Lines Plus Ground
|
2
|
Power Source Frequency
|
60 Hz (50 Hz Optional)
|
Maximum Curent
|
10A
|
Maximum Voltage
|
125 VAC Line to Ground (250 VAC Line to Ground optional)
|
Network Inductance Impedance
|
50µH / 250µH; 50 ohm
|
Power In Connector
|
IEC power inlet with customer specified plug
|
Power Out Connector
|
NEMA®
|
Physical Specifications
|
Depth
|
38.1 cm (15.00 inches)
|
Height
|
15.2 cm (5.98 inches)
|
Weight
|
4.9 kg ( 10.80 lb )
|
Width
|
22.2 cm (8.74 inches)
|
Standards
CISPR 11 |
CISPR 14 - 1 |
CISPR 14 - 2 |
CISPR 14 - 2 |
CISPR 16 - 1 |
CISPR 16 - 2 |
CISPR 16 - 3 |
CISPR 16 - 4 |
CISPR 22 |
CISPR 24 |
IEC/TR EN 61000 - 1 - 1 |
IEC/TR EN 61000 - 2 - 1 |
IEC/TR EN 61000 - 2 - 3 |
IEC EN 61000 - 3 - 2 |
IEC EN 61000 - 3 - 4 |
IEC/TC EN 61000 - 3 - 5 |
IEC EN 61000 - 4 - 2 |
IEC EN 61000 - 4 - 3 |
IEC EN 61000 - 4 - 4 |
IEC EN 61000 - 4 - 5 |
IEC EN 61000 - 4 - 6 |
IEC EN 61000 - 4 - 7 |
IEC EN 61000 - 4 - 8 |
IEC EN 61000 - 4 - 9 |
IEC EN 61000 - 4 - 11 |
EN 50 081 part 1 |
EN 50 081 part 2 |
EN 55 011 |
EN 55 013 |
EN 55 014 |
EN 55 015 |
EN 55 020 |
EN 55 022 |
EN 55 024 |
EN 50 082 part 1 |
EN 50 082 part 2 |
EN 50 093 |
FCC Part 15 |
MIL-STD - 461E |
|