EM TEST UCS 500N7.2 Multifunctional Transient Simulator

• Description
• Features
• Specifications

Description

The UCS 500N7.2 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/ product family standards with voltage capability of up to 7.0 kV. Apart from the IEC 61000-4-5 standard for surge testing it also complies with ANSI/IEEE C62.41 for surge testing. The UCS 500N7.2 not only represents the most economic solution for full-compliant immunity tests and CE Marking but goes far beyond. Having a built-in CDN for single phase DUTs it can be extended for testing three-phase DUTs by means of an automatically controlled external coupling network up to 100A.

The UCS 500N7.2 includes everything necessary to conduct fully compliant tests at levels that go far beyond common test requirements.

Surge can be test up to 7.0kV either according to IEC 61000-4-5 or ANSI/IEEE C62.41.

The UCS 500N7.2 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow controlling an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.

Pre-programmed Standard Test routines allow highest user convenience. Still the UCS 500N7.2 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT, a most appreciated benefit for tests at development stage.

Features

• Ultra-Compact Simulator up to 7.0kV
• Burst module (IEC/EN 61000-4-4)
• Surge module (IEC/EN 61000-4-5)
• PowerFail module (IEC/EN 61000-4-11)
• Telecom Surge Module (IEC/EN 61000-4-5) optional
• Magnetic field tests with optional accessories
• Built-in single phase coupler 400V/16A
• USB and GPIB-Bus for remote control
• Manual operation from front panel
• Monitor outputs for peak voltage and peak current
• Fail inputs
• External variac control 0-10Vdc
• Control of external three-phase couplers