Frequency range

300 kHz to 3 GHz

Maximum input level

+40 dBm (10 W, MAIN connector), +20 dBm (100 mW, AUX connector)

Input/output connector

MAIN I/O connector Impedance: 50 Ω, N-type

VSWR: :s1.2 (:s2.2 GHz), :s1.3 (>2.2 GHz)

AUX input/output connector: TNC-type

Reference oscillator

Frequency: 10 MHz Starting characteristics:

:s5 ✕ 10-8/day (after 10 minutes of warm-up, referred to frequency after 24 hours warm-up) Aging rate: :s2 ✕ 10-8/day, :s1 ✕ 10 –7/year (referred to frequency after 24 hours warm-up) Temperature characteristics: :s5 ✕ 10 –8 (0° to 50°C, referred to frequency at 25°C)

External standard input: 10 MHz or 13 MHz (±1 ppm), input level: 2 to 5 Vp-p

Power meter

Frequency range: 300 kHz to 3 GHz

Level range: 0 to +40 dBm, –10 to +40 dBm (CDMA measurement) Level accuracy: ±10% (0 to +40 dBm, after zero-point calibration),

±10% (–10 to +40 dBm, 18° to 28°C, at average value, after zero-point calibration)

Signal generator

Frequency

Range: 300 kHz to 3 GHz

Resolution: 1 Hz

Accuracy: Reference frequency accuracy ±100 mHz Output level

Level range (no modulation or analog modulation): –13 to –133 dBm (Main), +7 to –133 dBm (AUX)

Level accuracy: ±1 dB (10 MHz to 2.2 GHz, >–123 dBm, 18° to 28°C), ±3 dB (10 MHz to 2.2 GHz, >–133 dBm),

±2 dB (>2.2 GHz, >–123 dBm, 18° to 28°C), ±4 dB (>2.2 GHz, level: >–133 dBm)

Radiated interference:

1 µV/50 Ω(carrier frequency measured, 25 mm from front panel with two-turn 25 mm diameter loop antenna) Signal purity

Spurious: :s–50 dBc (at CW, offset frequency 100 kHz to :s50 MHz; where carrier frequency: other than 1300 to 1400 MHz and 2000 to 2100 MHz), :s–40 dBc (for all band)

Harmonics: :s–25 dBc (at CW)

Others

Display: Color TFT-LCD, 7.8 size , 640 ✕ 480 dots

Hard copy: Enables data hard copy of the display through a parallel interface (applicable only for EPSON VP series or equivalent)

GPIB: This equipment is specified as a device, can be controlled from external controller (excluding power switch and FD ejection key). No controller function

Interface: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2)

Parallel

Conform to the Centronics. Outputs printing data to printer. Data line exclusive for output: 8 Control line: 4 (BUSY, DTSB, ERROR, PE)

Connectors: D-sub 25 pins, female (equivalent to the connector of IBM-PC/AT built-in printer)

RS-232C: All functions except power switch controlled by external controller (baud rate: 1200, 2400, 4800, 9600 bps)

Dimensions and mass

426(W) ✕ 221.5(H) ✕ 451(D) mm, :s22 kg

Power

100 to 120/200 to 240 Vac (automatic voltage switch system), 47.5 to 63 Hz, :s300 VA

Operating temperature

0° to 50°C

EMC

EN61326: 1997/A1: 1998 (Class A), EN61000-3-2: 1995/A2: 1998 (Class A) EN61326: 1997/A1: 1998 (Annex A)

LVD

EN61010-1: 1993/A2: 1995 (Installation Category II, Pollution degree2)