Frequency range

300 kHz to 3 GHz

Maximum input level

+40 dBm (10 W, MAIN connector), +20 dBm (100 mW, AUX connector)

MAIN I/O connector

Input/output connector Impedance: 50 ½, N-type

VSWR: ²1.2 (²2.2 GHz), ²1.3 (>2.2 GHz)

AUX input/output connector: TCN-type

Reference oscillator

Frequency: 10 MHz

Starting characteristics: ²5 x 10–8/day (after 10 minutes of warm-up, referred to frequency after 24 hours warm-up)

Aging rate: ²2 x 10–8/day, ²1 x 10–7/year (referred to frequency after 24 hours warm-up)

Temperature characteristics: ²5 x 10–8 (0° to 50°C, referred to frequency at 25°C)

External standard input: 10 MHz or 13 MHz (±1 ppm), input level: 2 to 5 Vp-p

Power meter

Frequency range: 300 kHz to 3 GHz

Level range: 0 to +40 dBm

Measurement accuracy: ±10% (after zero point calibration)

Signal generator

Frequency

Range: 300 kHz to 3 GHz

Resolution: 1 Hz

Accuracy: Reference frequency accuracy ±100 mHz

Output level

Setting range: –143 to –28 dBm (MAIN connector), –143 to –3 dBm (AUX connector)

Level accuracy: ±1.5 dB (10 MHz to 1 GHz, ³–123 dBm), ±3 dB (10 MHz to 1 GHz, ³–133 dBm),

±2 dB (>1 GHz, ³–123 dBm), ±4 dB (>1 GHz, ³–133 dBm)

Radiated interference:

1 μV/50 ½ (carrier frequency measured, 25 mm from front panel with two-turn 25 mm diameter loop antenna)

Signal purity

Spurious: ²–50 dBc (at CW, offset frequency 100 kHz to ²50 MHz; where carrier frequency: other than 1300 MHz to

1400 MHz and 2000 MHz to 2100 MHz), ²–40 dBc (for all band)

Harmonics: ²–25 dBc (at CW)

Others

Display: Color TFT-LCD, 7.8 inches, 640 x 480 dots

Hard copy:

Enables data hard copy of the display through a parallel interface (applicable only for EPSON VP series or equivalent)

GPIB: This equipment is specified as a device, can be controlled from external controller (excluding power switch and FD

ejection key). No controller function

Interface: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2)

Parallel

Conform to the Centronics. Outputs printing data to printer. Data line exclusive for output: 8

Control line: 4 (BUSY, DTSB, ERROR, PE)

Connectors: D-sub 25 pins, female (equivalent to the connector of IBM-PC/AT built-in printer)

RS-232C: All functions except power switch controlled by external controller (baud rate: 1200, 2400, 4800, 9600 bps)

Dimensions and mass

426 (W) x 221.5 (H) x 451 (D) mm, ²22 kg

Power

100 to 120/200 to 240 Vac (automatic voltage switch system), 47.5 to 63 Hz, ²300 VA

Operating temperature

0° to 50°C