Amplifier Research 3000W1000B RF Amplifier 80 MHz – 1000 MHz 3000W

• Description
• Features
• Specifications

Description

Amplifier Research 3000W1000B is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.

The Model 3000W1000B, when used with an RF sweep generator, will nominally provide over 3000 watts of RF power.

The Model 3000W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides operational presentation of Forward Power and Reflected Power plus amplifier status.

Special features include a gain control, internal automatic level control (ALC) with front panel control of the ALC threshold, forward and reflective RF sample ports for precise power measurements and RF output level protection. Protection is provided by DC current level sensing of all output stages.

All amplifier control functions and status indications are available remotely in GPIB/IEEE- 488 format and RS-232 hardware and fiber optic, USB and Ethernet. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

Housed in a single equipment rack, the 3000W1000B provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via a rear panel connector.

Features

• Solid state
• Broadband
• Air cooled
• Gain control
• Digital control panel
• Push-pull circuitry
• Mismatch tolerant
• Modulation capability
• RF connector – Type N
• RF output level protection
• Interface – IEEE-488, RS-232 & Ethernet