»  Categories   »      Benchtop Oscilloscope   »    Oscilloscope  

image enlarge

Agilent 54624A 4 Channel 100 MHz Oscilloscope

Description

The Agilent 54624A 100 MHz Oscilloscope will give you the channel count and measurement power you need, including MegaZoom deep memory, high definition display and flexible triggering, especially if your designs include heavy analog content. Whether you're testing designs with four inputs, such as anti-lock brakes, or monitoring multiple outputs of a power supply, the four-channel model helps you get your debug and verification done with ease.

Features

  • Enhanced serial triggering capabilities and integrated 5-digit frequency counter measurement.
  • Lower cost deep memory 4-channel scope on the market
  • Unique 4-channel model
  • 100 MHz, 200 MSa/s
  • 2 MB of MegaZoom deep memory per channel
  • Patented high-definition display
  • Flexible triggering including I²C, SPI, CAN and USB

Specifications

Acquisition: Analog Channels

Max Sample Rate

200 MSa/s

Max Memory Depth

4 MB interleaved,

Vertical Resolution

8 bits

Peak Detection

5 ns

Averaging

Selectable from 2, 4, 8, 16, 32, 64 … to 16383

High Resolution Mode

12 bits of resolution when ≥500 μs/div, (average mode with ave = 1)

Filter

Sinx/x interpolation (single shot BW = sample rate/4 or bandwidth of scope, whichever is less) with vectors on

Vertical System: Analog Channels

Analog Channels

Ch 1, 2, 3 and 4 simultaneous acquisition

Bandwidth (-3dB)

dc to 500 MHz

ac Coupled

3.5 Hz to 500 MHz

Calculated Risetime
=0.35/bandwidth)

~700 ps

Single Shot Bandwidth

500 MHz maximum

Range1,2

1 mV/div to 5 V/div

Maximum Input

CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk
With 10073C/10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk
5 Vrms with 50 Ω input

Offset Range

±5 V on ranges <10 mV/div; ±25 V on ranges 10 mV/div to 199 mV/div;±100 V on ranges ≥200 mV/div

Dynamic Range

Lesser of ±8 div or ±32 V from center screen

Input Resistance

1 MΩ ±1%, 50 Ω selectable

Input Capacitance

~ 14 pF

Coupling

ac, dc, ground

>BW Limit

~ 20 MHz selectable

Channel-to-Channel Isolation
(with channels at same V/div)

dc to 20 MHz > 40 dB; 20 MHz to max bandwidth > 30 dB

ESD Tolerance

±2 kV

Noise Peak-to-Peak

2% full scale or 1 mV, whichever is greater

Common Mode Rejection Ratio

20 dB @ 50 MHz

DC Vertical Gain Accuracy*1,2

±2.0% full scale

DC Vertical Offset Accuracy

<200 mV/div: ±0.1 div ±1.0 mV ±0.5% offset value; ≥200 mV/div: ±0.1 div ±1.0 mV ±1.5% offset value

Single Cursor Accuracy1,2

±{DC Vertical Gain Accuracy + DC Vertical Offset Accuracy + 0.2% full scale (~1/2 LSB) }

Dual Cursor Accuracy*1,2

±{DC Vertical Gain Accuracy + 0.4% full scale (~1 LSB)}

Horizontal

Range

5 ns/div to 50 s/div

Resolution

25 ps

Vernier

1-2-5 increments when off, ~25 minor increments between major settings when on

Delay Range

Pre-trigger (negative delay): Greater of 1 screen width or 10 ms
Post-trigger (positive delay): 500 seconds

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E