Products

   »   Categories   »   Power Quality Analyzer

Power Quality Analyzer


Filter: 
AEMC 3945 Power Pad 3-Phase Power Quality Analyzer
AEMC 3945 Power Pad 3-Phase Power Quality Analyzer
The AEMC PowerPad Model 3945 power quality analyzer allows you to look inside your electrical system and see what is going on. Troubleshooting is so much easier because you can see the volts, amps and harmonic content in real-time and take pictures t... View Details >>
AEMC 8335 PowerPad 3-Phase Power Quality Analyzer
AEMC 8335 PowerPad 3-Phase Power Quality Analyzer
The AEMC 8335 Three-Phase Power Quality Analyzer is a three-phase power quality analyzer that is easy-to-use, compact and shock-resistant. It is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on... View Details >>
Agilent / HP 6811A Power Source Analyzer 375VA AC
Agilent / HP 6811A Power Source Analyzer 375VA AC
Single phase, 45Hz to 1KHz output frequency range, 375VA power output, 300V maximum rms voltage, ±425V DC voltage range, 3.25A maximum rms current output, 2.5A maximum DC current, Arbitrary waveform generation, Built in harmonic analysis capab... View Details >>
Chroma 6630 Power Analyzer
Chroma 6630 Power Analyzer
Chroma introduces a completely new concept, Power Measurement System, for fast and accurate power related measurements in compliance with international standards. The Power Measurement System consisting of an advanced 6630/6632 Power Analyzer and ... View Details >>
EM TEST DPA 500N Digital Power Analyzer Harmonics & Flicker Test
EM TEST DPA 500N Digital Power Analyzer Harmonics & Flicker Test
Harmonics and interharmonics are caused by modern electronic power conditioning modules. Such, mostly non-linear, modules to control loads and to reduce power consumption is the source of voltage at unwanted frequencies superposed on the supply volta... View Details >>
EM TEST DPA 503N Digital Power Analyzer Harmonics & Flicker Test
EM TEST DPA 503N Digital Power Analyzer Harmonics & Flicker Test
Harmonics and interharmonics are caused by modern electronic power conditioning modules. Such, mostly non-linear, modules to control loads and to reduce power consumption is the source of voltage at unwanted frequencies superposed on the supply volta... View Details >>
TESEQ ProfLine 2103 Single Phase Harmonics & Flicker System 3 kVA
TESEQ ProfLine 2103 Single Phase Harmonics & Flicker System 3 kVA
System ProfLine 2103 is an accurate and flexible single phase system designed to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Amps rms and 92 Amp peak @230 Vac. T... View Details >>
TESEQ ProfLine 2105 Single Phase Harmonics & Flicker System 5 kVA
TESEQ ProfLine 2105 Single Phase Harmonics & Flicker System 5 kVA
System ProfLine 2105 is an accurate and flexible single phase system designed to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Amps rms and 92 Amp peak @230 Vac. T... View Details >>
Yokogawa CW240 Clamp-On Power Meter
Yokogawa CW240 Clamp-On Power Meter
The CW240 power meter is a complete tool for enhancing energy efficiency, finding areas for improvement and assessing equipment lifecycles. The meter provides in-depth information on how an item of equipment, an area of a plant or a complete facility... View Details >>
ZES Zimmer LMG450 Multi Channel Power Analyzer
ZES Zimmer LMG450 Multi Channel Power Analyzer
The four-channel LMG450 power meter is another advanced product from ZES ZIMMER LMG series of precision power meters, tried and tested and with great acceptance in the market. It is designed as a uni¬versal meter for the entire field of power ele... View Details >>
ZES Zimmer LMG500 Precision Power Analyzer - 8 Channel
ZES Zimmer LMG500 Precision Power Analyzer - 8 Channel
Precision Power Meters (German: Prazisions-LeistungsMessGerate) of the series LMG by ZES ZIMMER LMG95 for single phase, LMG450 and LMG500 for multiphase measurements – are well known worldwide and have been proved invaluable in industrial applicati... View Details >>
ZES Zimmer LMG670 Precision Power Analyzer – 1 to 7 Channels
ZES Zimmer LMG670 Precision Power Analyzer – 1 to 7 Channels
The Zimmer LMG670 with its unique Dual Path architecture is the long-awaited solution to a well known dilemma. When optimizing designs for power applications with high-frequency content, engineers were forced to choose between analysis on the full po... View Details >>
ZES Zimmer LMG95 Single Phase Precision Power Analyzer
ZES Zimmer LMG95 Single Phase Precision Power Analyzer
The LMG95 single-phase precision power meter is an outstanding product in the proven LMG series of ZES ZIMMER® precision power measuring devices. Highly accurate continuously gapless signal measurement and processing, ergonomic operation and pres... View Details >>

Standards

ZES Zimmer LMG95e Single Phase Precision Power Analyzer
ZES Zimmer LMG95e Single Phase Precision Power Analyzer
The precision power analyzer LMG95e is the economic version of the proven LMG95. Available in a fixed configuration, it is the entry-level model of the LMG product family and balances price, accuracy and features. ... View Details >>
CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E