»   Categories   »   Loop Antenna

Loop Antenna


Filter: 
A.H. Systems EHA-51B Monopole and 12” Loop Antenna 1 kHz – 60 MHz
A.H. Systems EHA-51B Monopole and 12” Loop Antenna 1 kHz – 60 MHz
The A.H. Systems EHA-51B Antenna is an active, general-purpose, receive-only antenna that covers 1 kHz - 60 MHz. As a monopole antenna it is ideal for instantaneous bandwidth scanning (without tuning) of electric fields in its frequency range and... View Details >>
A.H. Systems SAS-560 Passive Loop Antenna 20 Hz – 2 MHz
A.H. Systems SAS-560 Passive Loop Antenna 20 Hz – 2 MHz
The SAS-560 passive Loop antenna was built for MIL-STD-461 RE 101 testing. This passive loop antenna has 36 turns enclosed in an electrostatic shielded loop. The loop diameter is 5 1/4" (13.3 cm) and has approximately 10 ohms of DC resistance. T... View Details >>
A.H. Systems SAS-561 Passive Loop Antenna 20 Hz – 50 kHz
A.H. Systems SAS-561 Passive Loop Antenna 20 Hz – 50 kHz
A.H. Systems' designs manufacture and deliver high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6, or individually to satisfy specific ... View Details >>
A.H. Systems SAS-562B Active Shielded Loop Antenna 10 kHz – 30 MHz
A.H. Systems SAS-562B Active Shielded Loop Antenna 10 kHz – 30 MHz
A.H. Systems' designs manufacture and deliver high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6, or individually to satisfy specific ... View Details >>
A.H. Systems SAS-563B Active Shielded Loop Antenna 1 kHz – 30 MHz
A.H. Systems SAS-563B Active Shielded Loop Antenna 1 kHz – 30 MHz
A.H. Systems' designs manufacture and deliver high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6, or individually to satisfy specific ... View Details >>
A.H. Systems SAS-564 Passive Loop Antenna 1 kHz – 30 MHz
A.H. Systems SAS-564 Passive Loop Antenna 1 kHz – 30 MHz
A.H. Systems' designs manufacture and deliver high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6, or individually to satisfy specific ... View Details >>
Com-Power AL-130 Active Loop Antenna 9 kHz – 30 MHz
Com-Power AL-130 Active Loop Antenna 9 kHz – 30 MHz
The AL-130 is a broadband active receiving loop an¬tenna for electromagnetic field measurements from 9 kHz - 30 MHz This antenna uses a 19 inch shielded loop for magnetic field (H-Field) measurements. The AL-130 has built in active electronics... View Details >>
ETS-Lindgren 6507 Active Shielded Loop Antenna 1 kHz – 30 MHz
ETS-Lindgren 6507 Active Shielded Loop Antenna 1 kHz – 30 MHz
The preamplifier helps this loop antenna produce good sensitivity and almost constant antenna factors. The saturation indicator is activated when an incoming signal exceeds the 5 V/m saturation limit of the internal preamplifier. Power for the preamp... View Details >>
ETS-Lindgren 6509 Passive Loop Antenna 1 kHz – 30 MHz
ETS-Lindgren 6509 Passive Loop Antenna 1 kHz – 30 MHz
The base of the Model 6509 loop antenna contains a type N female connector and a manually switchable four-band transformer. The transformer gives the antenna greater efficiency resulting in a better conversion of power to field strength. Every loo... View Details >>
ETS-Lindgren 6511 Shielded Loop Antenna 20 Hz – 5 MHz
ETS-Lindgren 6511 Shielded Loop Antenna 20 Hz – 5 MHz
The Model 6511 is designed for both Emissions and Immunity tests. Every loop antenna can be individually calibrated in accordance with the IEEE-291 Section 2.3.1 methods, using NIST traceable equipment. By knowing the actual antenna factors and perfo... View Details >>
ETS-Lindgren 6512 Shielded Loop Antenna 10 kHz - 30 MHz
ETS-Lindgren 6512 Shielded Loop Antenna 10 kHz - 30 MHz
The Model 6512 is a passive loop antenna designed for both emissions and immunity tests. Every loop antenna can be individually calibrated in accordance with the IEEE-291 Section 2.3.1 methods, using NIST traceable equipment. By knowing the actual... View Details >>
ETS-Lindgren 7603 Coil Antenna 20 Hz - 50 kHz
ETS-Lindgren 7603 Coil Antenna 20 Hz - 50 kHz
The Model 7603 is built from the specifications in the original MIL-STD-461 document. The Model 7603 is a magnetic field generating coil 12.0 cm (4.75 in) diameter, made of delrin and wound with 10 turns of AWG-16 wire. Every loop antenna can be ... View Details >>
ETS-Lindgren 7604 Shielded Coil Antenna 20 Hz - 500 kHz
ETS-Lindgren 7604 Shielded Coil Antenna 20 Hz - 500 kHz
The Model 7604 is a magnetic field pick-up coil 13.3 cm (5.25 in) diameter, and has a loop that is constructed of aluminum. The loop has 36 turns of 7 x 41 Litz wire for lower inductance. Every loop antenna can be individually calibrated in accord... View Details >>
ETS-Lindgren 7605-7606 Coil Antenna/Shielded Coil 30 Hz - 100 kHz
ETS-Lindgren 7605-7606 Coil Antenna/Shielded Coil 30 Hz - 100 kHz
The Model 7605, a radiating loop, and the Model 7606, a sensing loop, are used as part of a system to verify the ability of an EUT to withstand radiating magnetic fields. The Model 7605 is a 20-turn coil of AWG-12 enamel-insulated copper wire and fea... View Details >>
Solar 7334-1 Loop Antenna
Solar 7334-1 Loop Antenna
For RE01 and RE101 Magnetic Emissions Tests. The Solar Type 7334-1 Loop Antenna has been designed as a substitute for the AT-205/URM-6 antenna and is a replacement for Eaton Model 94607-1. It uses 36 turns of wire on a 5.25" (13.3 cm) diamete... View Details >>
Solar 7429-1 Loop Antenna
Solar 7429-1 Loop Antenna
For RS01 Magnetic Field Tests. The loop antenna used for generating radiated magnetic fields is fully described in Figure 1A of MIL-STD-461A. It consists of ten urns of number 16 A.W.G. wire on an insulated from 4.72" (12 cm) in diameter. The... View Details >>
Solar 9130-1 Loop Antenna
Solar 9130-1 Loop Antenna
For Receiving or Generating Magnetic Fields 10 kHz – 3 MHz This antenna was designed as a replacement for Eaton 94608-1. It is similar to Stoddart 91117-2, 30-inch diameter loop, supplied with AN/URM-6B and NM-10A EMI receivers. In addition to o... View Details >>
Solar 9230-1 Radiating Loop TYPE 9229-1 Loop Sensor
Solar 9230-1 Radiating Loop TYPE 9229-1 Loop Sensor
For MIL-STD-461D/RS101 Magnetic Field Tests. Test Method RS101 of MIL-STD-461D requires radiated magnetic fields over the frequency range 30 Hz to 100 KHz to determine the susceptibility or immunity of the equipment under test (EUT). Two loop ant... View Details >>
TESEQ HLA 6120 Loop Antenna 9 kHz – 30 MHz
TESEQ HLA 6120 Loop Antenna 9 kHz – 30 MHz
The HLA 6120 is ideal for the 3 m magnetic field measurements as required e.g. by CISPR 11 (reference CISPR 16-1-4 and CISPR 16-2-3) and FCC 18. The built-in preamplifier matches the extremely low impedance of the loop to the measuring receiver. The ... View Details >>

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E