Products

   »  Brands   »  A.H. Systems

Products by A.H. Systems


A.H. Systems manufactures a complete line of affordable, reliable, EMC test equipment. Their individually calibrated EMC Test Antennas, Preamplifiers, Current Probes and Low-Loss Cables satisfy many test standards including CISPR, MIL-STD, FCC, EN, VDE, IEC and SAE. With a wide variety of mounting configurations, they can also offer tripods and accessories that compliment other EMC testing equipment used to complete your testing requirements. They are also committed to providing all of their clients with no cost prompt and professional technical support. Manufacturing high quality products at competitive prices with immediate shipment plus prompt technical support are their goals to better its quality of your testing requirements.
Filter by Category:  
A.H. Systems SAS-550-1B Active Monopole Antenna 9 kHz - 60 MHz
A.H. Systems SAS-550-1B Active Monopole Antenna 9 kHz - 60 MHz
The A.H. Systems Active Monopole Antenna is an active, general-purpose, receive-only antenna that covers 9 KHz - 60 MHz frequency range. It is ideal for instantaneous bandwidth scanning (without tuning) of electric fields in its frequency range and c... View Details >>
A.H. Systems SAS-551 Passive Monopole Antenna 9 kHz - 40 MHz
A.H. Systems SAS-551 Passive Monopole Antenna 9 kHz - 40 MHz
Passive monopole for transmitting Broadband electric field from 9 kHz - 40 MHz A.H. Systems' Passive Monopole Antenna provides superior performance in electric field measurements. The Passive Monopole Antenna is used for transmitting to perfo... View Details >>
A.H. Systems SAS-570 Double Ridge Horn Antenna 170 MHz - 3 GHz
A.H. Systems SAS-570 Double Ridge Horn Antenna 170 MHz - 3 GHz
The A.H. Systems' Double Ridged Guide Horn is a broadband antenna that offers excellent performance over the frequency range of 170 MHz - 3 GHz. High gain, low VSWR, input handling capability up to 800 watts CW and rugged design make this horn ... View Details >>
A.H. Systems SAS-571 Double Ridge Horn Antenna 700 MHz - 18 GHz
A.H. Systems SAS-571 Double Ridge Horn Antenna 700 MHz - 18 GHz
The SAS-571 Double Ridge Guide Horn Antenna is lightweight, compact and has been manufactured for maximum gain, low VSWR and broadband response. The double ridge guide horn antenna was initially designed for surveillance where a high gain broadband r... View Details >>
A.H. Systems SAS-574 Double Ridge Guide Horn Antenna 18 GHz - 40 GHz
A.H. Systems SAS-574 Double Ridge Guide Horn Antenna 18 GHz - 40 GHz
The A.H. Systems' Double Ridge Guide Horn Antenna is a broadband antenna that offers excellent performance over the frequency range of 18 GHz to 40 GHz. High gain, low VSWR, and input handling capability up to 10 watts make this horn antenna an ... View Details >>
A.H. Systems ARE-571 Antenna Radome Enclosure
A.H. Systems ARE-571 Antenna Radome Enclosure
The ARE-571 antenna radome is a vacuum formed thermoplastic enclosure that offers excellent UV stability with minimal color shift over time when used outdoors. The radome cover is made of a high strength material to withstand abuse and still allow fo... View Details >>
A.H. Systems ATU-510 Antenna Tripod – Wood
A.H. Systems ATU-510 Antenna Tripod – Wood
The ATU-510 wooded Tripod comes with a spring loaded 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas. This wood tripod can hold up to 30 lbs. (13.6 Kg). Each wooden leg is adjustable independently of... View Details >>
A.H. Systems ATU-512 Antenna Tripod – Nylon
A.H. Systems ATU-512 Antenna Tripod – Nylon
The ATU-512 nylon Tripod comes with a spring loaded 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas. This small and compact nylon tripod can hold up to 16 lbs. (7.25 Kg). Each nylon leg is adjustable... View Details >>
A.H. Systems BCP-510 Broadband Current Probe 20 Hz – 1 MHz
A.H. Systems BCP-510 Broadband Current Probe 20 Hz – 1 MHz
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-510 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other ... View Details >>
A.H. Systems BCP-511 Broadband Current Probe 20 kHz – 100 MHz
A.H. Systems BCP-511 Broadband Current Probe 20 kHz – 100 MHz
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-511 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other ... View Details >>
A.H. Systems BCP-512 Broadband Current Probe 1 MHz – 1000 MHz
A.H. Systems BCP-512 Broadband Current Probe 1 MHz – 1000 MHz
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-512 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other ... View Details >>
A.H. Systems BCP-514 Broadband Current Probe 10 kHz – 100 MHz
A.H. Systems BCP-514 Broadband Current Probe 10 kHz – 100 MHz
The BCP-514 measures high power pulse currents such as those associated with EMP wave shapes. This current probe is designed to clamp around large conductors or bundles of wire with an aperture of 70 mm.... View Details >>
A.H. Systems BCP-515 Broadband Current Probe 1 MHz – 400 MHz
A.H. Systems BCP-515 Broadband Current Probe 1 MHz – 400 MHz
This current probe can operate without saturation from 300 amperes of DC to 400 Hz, 50 amperes of pulse current and 20 amperes of CW.... View Details >>
A.H. Systems BCP-516 Broadband Current Probe 10 kHz – 50 MHz
A.H. Systems BCP-516 Broadband Current Probe 10 kHz – 50 MHz
The BCP-516 is used to measure conducted emissions from 10 KHz to 50 MHz It has a usable frequency range of 10 Hz to 70 MHz This broadband current probe has a transfer impedance of 8 dBW (± 4 dB) from 30 KHz to 50 MHz The BCP-516 current probe... View Details >>
A.H. Systems BCP-518 Broadband Current Probe 100 kHz – 500 MHz
A.H. Systems BCP-518 Broadband Current Probe 100 kHz – 500 MHz
For ease and convenience of performing conducted measurements, all of our Current Probes utilize the split type clamp-on design. The BCP-518 is ideally suited to measuring currents for the immunity requirements of DO-160 and IEC-1000-4-6 on large cab... View Details >>
A.H. Systems BCP-519 Broadband Current Probe 100 Hz – 500 MHz
A.H. Systems BCP-519 Broadband Current Probe 100 Hz – 500 MHz
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-519 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other ... View Details >>
A.H. Systems BCP-620 Broadband Current Probe 10 kHz – 500 MHz
A.H. Systems BCP-620 Broadband Current Probe 10 kHz – 500 MHz
This current probe can handle 100 amperes of pulse currents and 50 amperes of CW between the usable frequency range of 10 kHz to 500 MHz.... View Details >>
A.H. Systems BCP-522 Broadband Current Probe 1 kHz – 200 MHz
A.H. Systems BCP-522 Broadband Current Probe 1 kHz – 200 MHz
This current probe is for laboratory and field testing where size is important. With a small outer diameter, approximately 71 mm with an internal diameter of 32 mm makes this current probe a powerful tool. The usable frequency range of the series is ... View Details >>
A.H. Systems BCP-526 Broadband Current Probe 1 kHz – 200 MHz
A.H. Systems BCP-526 Broadband Current Probe 1 kHz – 200 MHz
This current probe is for laboratory and field testing where size is important. With a small outer diameter, approximately 71 mm with an internal diameter of 32 mm makes this current probe a powerful tool. The usable frequency range of the series is ... View Details >>
A.H. Systems ECF-10 Equivalent Capacitive Fixture 100 Hz – 60 MHz
A.H. Systems ECF-10 Equivalent Capacitive Fixture 100 Hz – 60 MHz
The ECF-10 is a 10 pF capacitance fixture used for system checks and calibration of the active monopole antennas. One of the functions of the matching network is to convert the high impedance input of the antenna element to the 50 ohm impedance of th... View Details >>
A.H. Systems EHA-51B Monopole and 12” Loop Antenna 1 kHz – 60 MHz
A.H. Systems EHA-51B Monopole and 12” Loop Antenna 1 kHz – 60 MHz
The A.H. Systems EHA-51B Antenna is an active, general-purpose, receive-only antenna that covers 1 kHz - 60 MHz. As a monopole antenna it is ideal for instantaneous bandwidth scanning (without tuning) of electric fields in its frequency range and... View Details >>
A.H. Systems ICP-521 Current Injection Probe 10 kHz – 100 MHz
A.H. Systems ICP-521 Current Injection Probe 10 kHz – 100 MHz
The ICP-521 is low frequency injection current probe that can be used as pulse injection source as well as a sensitive monitoring probe. This probe can inductively couple transients having rise times as short as 5 nanoseconds and half pulse width dur... View Details >>
A.H. Systems ICP-522 Current Injection Probe 10 kHz – 400 MHz
A.H. Systems ICP-522 Current Injection Probe 10 kHz – 400 MHz
Injection Current Probes are used to inductively couple large RF currents into conductors passing through their aperture. The conductors are signal, control and power circuits of equipment under test for conducted susceptibility or immunity. This inj... View Details >>
A.H. Systems ICP-523 Current Injection Probe 300 kHz – 1000 MHz
A.H. Systems ICP-523 Current Injection Probe 300 kHz – 1000 MHz
This high frequency injection current probe is used for BCI testing in accordance with automotive specifications as well as diagnostic bulk current injection testing up to 1,300 MHz. The insertion loss is 7 dB or less from 1 MHz to 600 MHz and 11 dB ... View Details >>
A.H. Systems PAM-0118P Preamplifier 20 MHz – 18 GHz
A.H. Systems PAM-0118P Preamplifier 20 MHz – 18 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by 38 dB. All of A.H. Systems' Preamplifiers come with a 15-volt DC regu... View Details >>
A.H. Systems PAM-0126 Broadband Preamplifier 20 MHz – 26.5 GHz
A.H. Systems PAM-0126 Broadband Preamplifier 20 MHz – 26.5 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-vol... View Details >>
A.H. Systems PAM-0202 Preamplifier 20 MHz – 2 GHz
A.H. Systems PAM-0202 Preamplifier 20 MHz – 2 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 12-vol... View Details >>
A.H. Systems PAM-0204 Preamplifier 20 MHz – 4 GHz
A.H. Systems PAM-0204 Preamplifier 20 MHz – 4 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 12-vol... View Details >>
A.H. Systems PAM-0207 Preamplifier 20 MHz – 7 GHz
A.H. Systems PAM-0207 Preamplifier 20 MHz – 7 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 12-vol... View Details >>
A.H. Systems PAM-1826 Preamplifier 18 GHz – 26.5 GHz
A.H. Systems PAM-1826 Preamplifier 18 GHz – 26.5 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 15-vol... View Details >>

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E