The BHA 9118 is a linearly polarized broadband antenna which is ideal for many applications particularly EMC/RF measurements. It can be used for both receiving and transmitting. A precision N connector is used to provide low VSWR and high power handling capability.
The mounting bracket allows easy adjustment for vertical, horizontal and 45 deg polarization, and has a standard camera thread (1/4 X 20) hole that allows fitting to many support structures including all Teseq tripods (note Teseq adapters may be required).
The precision design is rugged and corrosion resistant. However, as with any precision instrument, care should be taken when using the BHA 9118. A protective strip protects the two fiberglass sides from accidental damage.
- Broadband horn antenna
- Frequency range 1 to 18 GHz
- Uniform gain
- High power handling
- Low VSWR
Parameter
|
Value
|
Frequency range
|
1 to 18 GHz
|
Typical gain
|
4 to 15 dBi (4 to 32 numeric)
|
Impedance (nominal)
|
50 Ω
|
Maximum continuous power
|
200 W
|
Cross polarization
|
20 dB minimum
|
Standards
CISPR 11 |
CISPR 14 - 1 |
CISPR 14 - 2 |
CISPR 14 - 2 |
CISPR 16 - 1 |
CISPR 16 - 2 |
CISPR 16 - 3 |
CISPR 16 - 4 |
CISPR 22 |
CISPR 24 |
IEC/TR EN 61000 - 1 - 1 |
IEC/TR EN 61000 - 2 - 1 |
IEC/TR EN 61000 - 2 - 3 |
IEC EN 61000 - 3 - 2 |
IEC EN 61000 - 3 - 4 |
IEC/TC EN 61000 - 3 - 5 |
IEC EN 61000 - 4 - 2 |
IEC EN 61000 - 4 - 3 |
IEC EN 61000 - 4 - 4 |
IEC EN 61000 - 4 - 5 |
IEC EN 61000 - 4 - 6 |
IEC EN 61000 - 4 - 7 |
IEC EN 61000 - 4 - 8 |
IEC EN 61000 - 4 - 9 |
IEC EN 61000 - 4 - 11 |
EN 50 081 part 1 |
EN 50 081 part 2 |
EN 55 011 |
EN 55 013 |
EN 55 014 |
EN 55 015 |
EN 55 020 |
EN 55 022 |
EN 55 024 |
EN 50 082 part 1 |
EN 50 082 part 2 |
EN 50 093 |
FCC Part 15 |
MIL-STD - 461E |
|