BULK CURRENT INJECTION AS PER ISO 11452-4
|
Output level
|
As required in ISO 11452-4, using closed loop or substitution method
|
BULK CURRENT INJECTION AS PER MIL 461 CS 114
|
Output level
|
As required in MIL 461 CS 114, using the closed loop method
|
MEASUREMENTS FOR BULK CURRENT INJECTION
|
Directional coupler
|
Included to measure forward power and reverse power
|
Forward power
|
Internal power meter #1
|
Reverse power
|
Internal power meter #2
|
Injected current
|
Internal power meter #3
|
TEST ROUTINES FOR BULK CURRENT INJECTION
|
ISO 11452-4
|
Operation via icd.control
|
MIL 461 CS114
|
Operation via icd.control
|
IEC 61000-4-6
|
Output level
|
1V - 30Vrms (emf) all standard test levels are guaranteed with all coupling methods
|
MEASUREMENTS, IEC 61000-4-6
|
Cal in (BNC)
|
Integrated power meter to record the calibration data of a coupling device
|
Injected current
|
Measured by internal power meter
|
RF indicator
|
LED indicating the RF output status
|
LCD
|
Display of the test level and the preselected frequency value
|
OUTPUT
|
RF output
|
N connector at the front panel
|
Ouptut power
|
Built-in amplifier
50dBm (9kHz - 400MHz) at 1dB compression.
|
Gain amplifier
|
> 50dB
|
Output impedance
|
50ohm
|
Harmonic distortion
|
< -20dBc at max. power
|
Insertion loss
|
Approx. 1dB (directional coupler + RF relay)
|
GENERAL DATA
|
Dimensions
|
19"/6HU
|
Weight
|
approx. 31kg
|
Supply voltage
|
115V to 230V +10/-15%, 50/60Hz
|
Input power
|
Max. 380W
|
Power factor
|
cos (phi) = 0.96 at max. output power as per IEC 555
|
Fuses
|
2 x 6.3AT (115V) or
2 x 3.15AT (230V)
|
Cooling
|
Active cooling, air ventilation
|
Temperature
|
10°C to 40°C
|
Rel. humidity
|
Max. 85%, non condensing
|