»  Categories   »      Programmable Supply   »    Single Phase Power   »    DC Power Supply   »    Power Supply  

image enlarge

Sorensen XG 33-50 Programmable DC Power Supply 33V 50A 1690W

Description

The XG 1700 is an industry leading programmable DC power supply designed for test, production, laboratory, OEM and quality assurance applications. The XG 1700 is a 1700 Watt, 1U programmable power supply with constant voltage and constant current modes, automatic cross-over and numerous features enabling cost effective, easy integration.

Easy Integration
XG 1700 has many control and indication signals such as shutdown, constant voltage (CV) vs. constant current (CC) mode indication, OVP, OCP, OTP, and so on. In addition, the logical-high or -low is free selectable, thus enabling the XG 1700 to replace existing power supplies with little or no system engineering required.

Free Selectable Analog Control Range
Most DC power supplies provide a 0 to 5 or 0 to 10 V analog control range to control the DC output from zero to full DC output range. With the XG 1700, the analog control range is free selectable starting at 0V to an upper range between 2V and 10V. In other words, the analog programming interface range is freely adjustable.

Auxiliary DC Output Channels with Control
In many ATE systems one or more low power, fixed voltage supplies are needed to provide electrical power for any periphery within the ATE cabinet. For this purpose, the XG 1700 provides two standard auxiliary DC output channels. Both auxiliary power channels are controllable directly from the front-panel or through SCPI commands. With these channels, it is possible to drive output-disconnect or polarity-reversal relays, without needing a complicated computer controlled relay board.

DC-Waveforms through Internal Sequencing
To allow for extremely fast programming, sequences can be programmed into and stored in memory using standard SCPI commands through USB, RS-232/485, LXI or GPIB.

Variable Fan Speed Control
The XG 1700s innovative approach to fan speed is determined by internal heat sink temperature. This allows the fans to adjust to a constant optimal speed when the output of the supply is being pulsed. This also reduces noise and increases fan life.

Power Saving Standby Mode
When the XG 1700 has been in an idle state, the supply can go into sleep mode, much like a computer monitor. This will allow the user to save energy and minimize lab noise. Since an XG 1700 left in sleep mode is still on the user will have quicker access to an enabled output.

Output Auto Start Mode (Auto Restart)
The Auto Start mode establishes the state of the output of the power supply after recovery from a complete power cycle (all front panel LEDs are not illuminated), or after recovery from a PC failure or reboot. If Auto Start mode is set to On, the power supply output will return to its previous value. Also, after the loss of any remote digital control, the XG unit will remain active in its last programmed setting and will not disrupt any test process.

Auxiliary Auto Start Mode
The Auxiliary Auto Start mode determines the state of the auxiliary output after a complete power cycle (all front panel LEDS are not illuminated). With Auxiliary Auto Start mode turned to On, the auxiliary output will be activated after the power supply is powered up again.

Foldback Mode
Foldback mode is used to disable the output when a transition is made between the operating modes. The power supply will turn off/disable the output and lock in foldback mode after a specified delay if the power supply transitions into CV mode or into CC mode, depending on the foldback mode settings. This feature is particularly useful for protecting current or voltage sensitive loads. Foldback can be set to trigger a switch when transitioning from CV to CC mode or from CC to CV mode.

Features

  • Industry Leading Power Density - Up to 1700 Watts in 1U
  • Standard Digital Interfaces – USB&RS232/485
  • LXI Ethernet and Isolated analog interfaces
  • Power Factor Correction-PFC and
  • universal AC input “Green” Sleep Mode – Automatically “sleeps” after period of non-use
  • Built in sequencing - Unload your system controller
  • Programmable fold-back protection delay

Specifications

Output Ratings

Model

Output Voltage¹

Output Current²

Output Power³

XG 6-220

6 V

220 A

1330 W

XG 8-200

8 V

200 A

1610 W

XG 12-140

12 V

140 A

1690 W

XG 20-84

20 V

84 A

1690 W

XG 33-50

33 V

50 A

1690 W

XG 40-42

40 V

42 A

1690 W

XG 60-28

60 V

28 A

1690 W

XG 80-21

80 V

21 A

1690 W

XG 100-17

100 V

17A

1710 W

XG 150-11.2

150 V

11.2 A

1690 W

XG 300-5.6

300 V

5.6 A

1690 W

XG 600-2.8

600 V

2.8 A

1690 W

Line Regulation

Model

Voltage (0.005% of rated 
output voltage +2 mV)4

Current (0.01% of rated 
output current +2 mA)5

XG 6-220

2.3 mV

24 mA

XG 8-200

2.4 mV

22 mA

XG 12-140

2.6 mV

16 mA

XG 20-84

3.0 mV

10.4 mA

XG 33-50

3.7 mV

7 mA

XG 40-42

4 mV

6.2 mA

XG 60-28

5 mV

4.8 mA

XG 80-21

6 mV

4.1 mA

XG 100-17

7 mV

3.7 mA

XG 150-11.2

9.5 mV

3.12 mA

XG 300-5.6

17 mV

2.56 mA

XG 600-2.8

32 mV

2.28 mA

Load Regulation

Model

Voltage (0.005% of rated 
output voltage + 2 mV)6

Current (0.02% of rated 
output current +5 mA)7

XG 6-220

2.3 mV

49 mA

XG 8-200

2.4 mV

45 mA

XG 12-140

2.6 mV

33 mA

XG 20-84

3.0 mV

22 mA

XG 33-50

3.7 mV

15 mA

XG 40-42

4 mV

13 mA

XG 60-28

5 mV

1.06 mA

XG 80-21

6 mV

9.21 mA

XG 100-17

7 mV

8.4 mA

XG 150-11.2

9.5 mV

7.2 mA

XG 300-5.6

17 mV

6.1 mA

XG 600-2.8

32 mV

5.6 mA

Output Ratings

Model

Output Noise (rms, 300 kHz)

Output Ripple 
(p-p, 20 MHz)

Voltage

Current8

Voltage

XG 6-220

8 mV

400 mA

50 mV

XG 8-200

8 mV

340 mA

50 mV

XG 12-140

8 mV

240 mA

50 mV

XG 20-84

8 mV

150 mA

50 mV

XG 33-50

8 mV

120 mA

50 mV

XG 40-42

8 mV

90 mA

50 mV

XG 60-28

8 mV

75 mA

50 mV

XG 80-21

8 mV

50 mA

80 mV

XG 100-17

8 mV

40 mA

80 mV

XG 150-11.2

10 mV

32 mA

100 mV

XG 300-5.6

25 mV

20 mA

150 mV

XG 600-2.8

50 mV

12 mA

250 mV

1. Maximum output voltage is guaranteed to be 0.1% of the rated voltage at zero output setting, using the front panel or digital remote programming modes.
2. Maximum output current is guaranteed to be 0.2% of the rated current at zero output setting, using the front panel or digital remote programming modes, and when measured with rated load resistance.
3. Total output power is also based on AUX1 Output Voltage (5 V) and AUX1 Output Current (0.5 A) and AUX2 Output Voltage (15 V) and AUX2 Output Current (0.5 A).
4. From 85–132 Vac or 170–265 Vac, constant load.
5. From 85–132 Vac or 170–265 Vac, constant load.
6. From no load to full load, constant input voltage.
7. For load voltage change, equal to the unit voltage rating, constant input voltage.
8. For 6 V models the current ripple is measured at 2–6 V output voltage and full output current. For all other models, the current ripple is measured at 10–100% output voltage and full output current.

Output Ratings

Model

Maximum Recommended Remote Sense Line Drop Compensation per Line 9

Up-prog. Response Time, 0~Vmax 10

Efficiency (100/200 VAC input) 11

XG 6-220

1 V

60 ms

76/78%

XG 8-200

1 V

60 ms

77/79%

XG 12-140

1 V

60 ms

81/84%

XG 20-84

1.5 V

60 ms

82/85%

XG 33-50

2 V

60 ms

83/86%

XG 40-42

2 V

60 ms

83/87%

XG 60-28

3 V

60 ms

84/88%

XG 80-21

5 V

100 ms

84/88%

XG 100-17

5 V

100 ms

84/88%

XG 150-11.2

5 V

100 ms

84/88%

XG 300-5.6

5 V

150 ms

84/88%

XG 600-2.8

5 V

250 ms

84/88%

Output Ratings

Model

Down-prog. Response Time: Full Load

Down-prog. Response Time: No Load

Over-Voltage Trip Point

XG 6-220

50 ms

300 ms

0.5–7.5 V

XG 8-200

50 ms

400 ms

0.5–10 V

XG 12-140

50 ms

500 ms

1–15 V

XG 20-84

50 ms

600 ms

1–24 V

XG 33-50

50 ms

700 ms

2–39 V

XG 40-42

50 ms

800 ms

2–44 V

XG 60-28

50 ms

900 ms

3–66 V

XG 80-21

80 ms

1000 ms

3–95 V

XG 100-17

100 ms

1200 ms

3–125 V

XG 150-11.2

150 ms

1800 ms

3–180 V

XG 300-5.6

150 ms

2200 ms

5–330 V

XG 600-2.8

250 ms

3500 ms

5–660 V

9. When using remote sense, the total of the load voltage and the load line drops must not exceed the rated output of the power supply. For example, for an XG 6-220 in an application with 1 V of load line loss (0.5 V/Line), the maximum available load voltage would be 6-1=5 V. Note: The unit may operate at higher output voltages than this, but there is no guarantee That the power supply will meet performance specifications. Ultimately, the upper limit of the output voltage will be determined by internal circuitry of the power supply (non-adjustable) 
10. With rated, resistive load. 
11. At 100/200 Vac input voltage and maximum output power. Applies to all footnotes: Programming and Readback: RS-232, RS-485, USB built in. GP1B, Ethernet optional. Specifications are guaranteed from 1% to 100% of the rated output voltage, current, and power. 
* Typical 
Note: All specifications are subject to change.

AC Line Input Specifications

Rated AC Input Voltage/Frequency

100–240 Vac, 47–63 Hz

Operational AC Input Voltage/Frequency

85–265 Vac continuous, 47–63 Hz, single phase

Input Current (at 100/200 Vac)

23/12 A

Inrush Current (100/200 Vac)

Less than: 50 A

Power Factor Correction

0.99@100/200 Vac, rated output power

Output Performance Specifications

Temperature Coefficient

100 PPM/° C from rated output voltage, after a 30-minute warm-up*

Drift (8 hours)

0.05% of rated output voltage & current over an 8 hour interval with constant line, load & temperature, after a 30-minute warm-up

Hold-up Time

Typical 20 ms at any rated input line.

Transient Response Time 13

Less than 1 ms for 6 V to 60 V models. Less than 2 ms for 80 V to 600 V models*

Meter Accuracy

0.5% ± 1 count

Isolation 12

1500Vac or 2121Vdc between mains terminals and accessible conductive parts / chassis ground. 
Output to chassis 500Vac.

Environmental Specifications (Indoor Use)

Operating Temperature Range

32°F to 122°F, 100% load (0°C to 50°C)

Storage Temperature Range

-4°F to 158°F (–20° C to 70°C)

Operating Humidity Range

30–90% RH (no condensation)

Storage Humidity Range

10–95% RH (no condensation)

Operating Altitude

Up to 6,500 feet (2,000 m)

Installation Category

II (IEC 1010-1)

Pollution Degree

2 (IEC 1010-1)

Mechanical Specifications

XG 1700 Watt (W×H×D)

16.8 x 1.7 x 19.0 inch (429 x 43.6 x 483 mm without rack mount ears)

Weight

22 lb (10 kg)

Cooling

Forced air cooling by internal fans

Regulatory Approvals

Safety

CSA 22.2 No. 61010-1, 60950-1-07 and UL61010-1, UL60950-1-(2nd Ed) 12 12. Marked with cCSAus, CE for EMC & low voltage directive

EMC

Complies with EN61326-1 
Complies with EN55022, Class B, FCC Part 15B for conducted emissions 
Complies with EN55022, Class A, FCC Part 15A for radiated emissions 
Complies with EN61000-4 series of standards for immunity

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E