»  Categories   »      EMC / EMI   »    Solid State Amplifier   »    Audio Power Amplifier   »    Amplifier  

image enlarge

Solar 6552-1A Solid State Audio Amplifier 100 Watt

Description

For Conducted Audio Frequency Susceptibility Testing.

The Model 6552-1A Audio Amplifier has a wide frequency response and is capable of providing up to 100 watts at 1000 Hz into 2.4 ohms at low distortion levels. Requires approximately 0.6 volt signal input for maximum power output at 1000 Hz. Incorporates feedback circuit for flat response within one dB from 30 Hz to 100 KHz at reduced power levels.

The -3 dB points are 25 Hz and 120 KHz when using the 6220-1A Transformer loaded with 0.6 ohm. Cleverly designed protective circuit prevents damage due to transients, back EMF, overload or overdrive. Designed for laboratory use with portable case and conventional binding posts spaced .75" for standard shielded lead and double plug connections.

Features

  • Solid state
  • Up to 100 watts output
  • Wide frequency range
  • Low input impedance
  • No output transformer
  • Input and output protective circuits
  • Lightweight and portable

Solar 6552-1A Applications

The Model 6552-1A 100 watt Solid State Audio Amplifier was specifically designed for use with the Type 6220-1A Audio Isolation Transformer in making conducted audio frequency susceptibility tests as required by MIL-STD-461A/462 and other EMI specifications.

Specifications

Input Voltage

0.6 volt for maximum power output at 1000 Hz

Input Impedance

Input Impedance: 500-600 ohms

Output Power

100 watts at 1 KHz into 2.4 ohms

Output Impedance

2.4 ohms

Output Voltage

16 volts r.m.s. at 1000 Hz into 2.4 ohms (non-inductive)

Output Voltage at Secondary of 6220-1A

7.7 volts r.m.s. into 0.6 ohm (non-inductive)

Gain Control

Panel mounted input level control

Terminals

Three-way binding posts spaced at .75" for input and output.

Fuses

Two a.c. line fuses (5 amps), one d.c. power supply fuse (5 amps), one output overload fuse (6 amps)

Power Requirements

115 volts 60 Hz, 4.0 amperes. (230 volts 50 Hz, 2.0 amperes available)

Size

8.12" wide, 9" high, 14.62" deep (20.64 cm x 22.86 cm x 37.15 cm)

Model 7824-1

Rack version of Model 6552-1A. All connections out the rear

Dimensions

8.75" high x 19" wide x 12.75" deep (22.22 cm x 48.24 cm x 32.38 cm)

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E