»  Categories   »      Spectrum Analyzer   »    Analyzer  

image enlarge

Rohde & Schwarz FSH3 Universal Combined TV/ Spectrum Analyzer 100

Description

The TV Analyzer R&S®FSH3-TV combines the functions and features of a complete spectrum analyzer with those of a TV test receiver in a single measurement instrument. It can be taken wherever needed and is ideal for technicians who perform measurements on site – for example, during new installations or maintenance and repair work on components of TV cable networks and transmitters.

Robust and portable

The instrument's compact housing is designed for portable use. Its robust edge protection and RF connector covers safeguard the R&S®FSH3-TV against mechanical and weather-related conditions. The R&S®FSH3-TV weighs only 2.8 kg. It has a sturdy carrying handle that also makes reading the display easy when the instrument is placed on a flat surface. In addition, an integrated stand allows the R&S®FSH3-TV to be positioned to the optimum angle for reading results. The powerful, built-in NiMH battery can power the instrument for up to four hours, thus providing reliable operation even at remote locations.

Convenient operation

The R&S®FSH3-TV is operated by means of convenient menus and softkeys. Frequently used functions can be selected directly. In addition, a rotary knob allows quick and easy variation of entry values and the selection of items from menus. Measured values and menus are shown on a backlit color liquid crystal display. The display remains legible even under difficult lighting conditions (daylight).

Well-equipped

The TV Analyzer R&S®FSH3-TV comes equipped with a TV board, a preamplifier and a tracking generator. The TV board permits measurements of analog TV signals and their demodulation. The demodulated video signal, which is made available at an output that can be used either as a CCVS (analog TV) or as a TS-ASI (digital TV) output, can be routed to an external monitor or an MPEG decoder. The supplied headphones can be used to listen to the sound of the analog TV signal.

Made for TV

The TV Analyzer R&S®FSH3-TV offers the same scope of functions as any spectrum analyzer from the R&S®FSH family of Rohde & Schwarz instruments. However, additional settings and options have been added that are specially designed for measurements needed by TV cable operators and transmitter network operators.

The main expansion is the TV board integrated in the base unit. This board provides additional capabilities for analyzing and demodulating analog and digital TV signals. The following table provides a summary of the available TV standards. The R&S®FSH3-TV comes equipped with a female N connector (50 Ω) for the RF input. To ensure that the correct characteristic impedance is achieved when the R&S®FSH3-TV is connected to cable network components or, for example, to TV antenna systems with 75 Ω impedance, the R&S®RAZ and R&S®FSH-Z38 50 Ω/75 Ω matching pads are offered as options.

Features

  • Measurement functions for analog and digital TV signals
  • Full-fledged spectrum analyzer
  • Combined video/ASI output
  • Compact and robust housing
  • Up to four hours operating time on battery power
  • Wide selection of accessories for diverse measurement tasks
  • Pre-selector option with 75Ω RF input

Specifications

Frequency range

100 kHz to 3 GHz

Resolution bandwidths

100 Hz to 1 MHz

Video bandwidths

10 Hz to 1 MHz

Displayed average noise level (DANL)

typ. –135 dBm (100 Hz)

TOI

typ. 13 dBm

SSB phase noise

<–100 dBc (1 Hz) at 100 kHz from carrier

Sweep at span

= 0 Hz 100 µs to 100 s

Detectors

sample, max/min peak, auto peak

Level measurement uncertainty

<1.5 dB, typ. 0.5 dB

Reference level

–80 dBm bis +20 dBm

Dimensions

170 mm × 120 mm × 270 mm

Weight

2.8 kg

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E