|
IMPULSE MODULES
|
|
PIM 100
|
Combination wave impulse module
|
|
Built according to IEC/EN 61000-4-5 Ed. 1 & 2 and ANSI C62.41/45
|
|
1.2/50 μs open circuit up to 7.4 kV
|
|
8/20 μs short circuit up to 3.7 kA
|
|
Impulse voltage and current monitors
|
|
± 1° phase synchronization
|
|
Reliable semiconductor HV-switch
|
|
Positive, negative and alternating polarity
|
|
Up to 12 pulses per minute
|
|
|
|
PIM 110
|
Ring wave impulse module
|
|
Built according to IEC/EN 61000-4-12 and ANSI C62.41/45
|
|
100 kHz frequency, 0.5 μs rise time
|
|
Imp. voltage up to 7.8 kV / 12 Ω, 30 Ω and 200 Ω
|
|
Impulse voltage and current monitors
|
|
± 1° phase synchronization
|
|
Positive, negative and alternating polarity
|
|
Up to 12 pulses per minute
|
|
Reliable semiconductor HV-switch
|
|
|
|
PIM 120
|
Telecom wave impulse module
|
|
Built according to IEC/EN 61000-4-5 Ed. 1 & 2, ITU K-series and IEC 60950
|
|
10/700 μs open circuit voltage
|
|
5/320 μs short circuit current
|
|
Imp. voltage up to 7.4 kV / 15 Ω and 40 Ω
|
|
Impulse voltage & current monitors
|
|
Reliable semiconductor HV-switch
|
|
Positive, negative and alternating polarity
|
|
Up to 12 pulses per minute
|
|
|
|
PCD 120
|
Four-wire coupling unit for telecom wave
|
|
4 wire coupling unit for unshielded symmetrical operated lines
|
|
Compliant with IEC 61000-4-5 (10/700 μs impulse only), ITU K.20 / K.21 / K.44 / K.45
|
|
Fully automated operation
|
|
|
|
PIM 150
|
Oscillating wave impulse module
|
|
Built according to IEC/EN 61000-4-12 Ed.1, IEC 61000-4-18 Ed.1, IEC 60255-22-1 and ANSI C37.90
|
|
100 kHz and 1 MHz burst frequencies
|
|
75 ns rise time
|
|
Impulse voltage up to 3.3 kV / 200 Ω
|
|
Integrated, fully automatic CDN for three-phase AC and DC power lines
|
|
EUT mains voltage up to 480 V / 277 V 16 A
|
|
Impulse voltage monitor
|
|
Capacitive coupling clamp available optionally (IP 4 A)
|
|
Data line CDN available optionally (PCD 150)
|
|
|
|
COUPLING / DECOUPLING NETWORKS
|
|
PCD 100
|
Single phase CDN for combination & ring wave
|
|
Built according to IEC/EN 61000-4-5 Edition 1 & 2 ANSI C62.41/45, TIA-968A (FCC part 68/47 CFR), Telcordia (Bellcore) GR 1089 CORE
|
|
Fully automated test routines
|
|
Coupling of up to two different wave-shapes without any rewiring
|
|
For combination wave, ring wave and others (PIM 100, PIM 110)
|
|
Up to 8 kV impulse voltage
|
|
EUT mains up to 264 V / 16 A
|
|
|
|
PCD 130
|
Three phase CDN for combination and ring wave
|
|
Built according to IEC/EN 61000-4-5 Edition 1 & 2 ANSI C62.41/45, TIA-968A (FCC part 68/47 CFR), Telcordia (Bellcore) GR 1089 CORE
|
|
Fully automated test routines
|
|
Coupling of up to three different wave- shapes without any rewiring
|
|
For combination wave, ring wave and others
|
|
Up to 8 kV impulse voltage
|
|
EUT mains voltage up to 690 V / 400 V
|
|
EUT mains current up to 32 A per phase
|
|
Correct phase angle synchronization for each coupling path
|
» 
