»  Categories   »      Voltage Surge Generator   »    Surge Generator   »    Pulse Generator   »    EFT/Burst Generator   »    Combo Wave Generator   »    Generator  

image enlarge

Haefely PIM 100 1.2/50us & 8/20us Combination Wave Impulse Module

Description

IEC 61000-4-5 and ANSI C62.41 describe a combination Wave or Hybrid generator with defined open AND short circuit waveforms. The Combination Wave is used to test AC and DC power systems.

Safety is paramount with surge impulses. The PIM 100 High Voltage connections are all linked into the System Safety Concept which prevents high voltage plugs or cables from exposing operators to potentially lethal voltages. This concept is extended to Coupling/Decoupling Networks (CDNs) connected to the PIM 100 output.

PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power lines. Single and three phase CDNs have multiplexed inputs, allowing up to 3 impulse modules to be connected. A full suite of test impulses can then be performed completely automatically and without the need to power down and reconnect the EUT.

PSURGE 8000 Surge Platform can perform all the programming functions required to perform IEC and ANSI testing without the need of a control computer. Voltage and Current monitor circuits enable quick and easy verification of the impulse shape and amplitude. In addition, peak measurement circuits are used to help determine EUT PASS/FAIL criterion.

The integration in the WinFEAT&R control and reporting software package enhances an efficient set-up and operation of this test system. Most importantly, the test load can be transferred to a computer freeing valuable resources.

Features

  • Floating high voltage output
  • Combination wave 1.2/50us - 8/20us
  • 7.4kV impulse voltage
  • 3.7kA impulse current
  • Impulse voltage & current monitors
  • Accurate phase angle synchronization

Applications

  • Single & Three phase power line systems
  • IEC 61000-4-5 Edition 1 and 2 Power & Data lines
  • ANSI C62.41 Power lines
  • Many IEC & EN Product standards
  • Other international requirements for Hybrid impulses

Specifications

Impulse Voltage

0.20 – 7.4kV ±10%

Impulse Current

0.10 – 3.7kA ±10%

Source Impedance

2 Ohms

Repetition @ Umax

10 seconds / 6 per minute

Line Synchronization

1° steps ±1° @50Hz

Impulse front time

V= 1.2us ±30% & I= 8us ±20%

Impulse duration

V= 50us ±20% & I= 20us ±20%

Monitor Outputs

BNC, volts(750/1) current(400A/V)

Impulse Polarity

Positive and Negative

Impulse Output

HV connector with safety circuit

Dimensions (W x H x D)

45 x 20 x 57 cm

Weight

44 lbs (29 kg)

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E