»  Categories   »      Transient Generator   »    EFT/Burst Generator   »    Generator  

image enlarge

EM TEST UCS 500N5E EFT/Burst Generator for Transients 5.5kV

Description

The UCS 500N5E is a new dedicated EFT/Burst generator based on the successful UCS 500N series of ultra-compact simulators. Offering all the benefits of the well-known UCS 500N5 it is designed as a Burst generator only. This makes it the full performing Burst tester as per IEC/EN 61000-4-4 with the best benefit-to-cost ratio yet upgradeable to include other test abilities such as Combination Wave Surge and PowerFail.

Apart from its built-in single phase test capability it is extendable for testing three-phase DUTs by means of automatically controlled external coupling networks up to 100A. EM TEST supplies a large range of accessories for various applications.
The UCS 500N5E offers an extended test voltage range up to 5.5kV for testing far beyond the basic requirements. This makes it THE tool for development testing as well as fully-compliant standard tests as per IEC/EN 61000-4-4.

With its capabilities to generate up to 10,000 pulses per seconds and 1,000 pulses per burst it helps to find weak parts beyond the normative limits.

With its built-in single phase CDN up to 300V/16A AC/DC the UCS 500N5E copes with all common mains supply voltages. Three-phase CDNs extend its applicability for three-phase testing of DUTs with a nominal current of 100A and more. Special couplers for testing energy meters are also available.

The UCS 500N5E can be operated manually from the front panel offering pre-programmed standard test routines. Yet it also offers the Quick Start test where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT and the ability of programming user defined test routines.

USB and GPIB interfaces are provided for remote control via iec.control software. Fail inputs allow controlling an ongoing test sequence based on the status of the DUT.

Features

  • Fully compliant to IEC 61000-4-4 Am1 Ed.2
  • Test voltage up to 5.5kV
  • Up to 10,000 pulses per second
  • Up to 1,000 pulses per burst
  • Built-in single phase coupler 300V/16A
  • Manual operation from front panel
  • USB and GPIB-Bus for remote control
  • Fail inputs
  • Control of external three-phase couplers

Specifications

As per EN/IEC 61000-4-4 and EN 61000-6-1, -6-2

Test voltage

200V - 5,500V ± 10%;

100V - 2,750V ± 10% into 50ohm

Pulse shape

5/50ns into 50ohm and 1,000ohm

Rise time tr

5ns ± 30% into 50ohm;

5ns ± 30% into 1,000ohm

Pulse width td

50ns ± 30% into 50ohm;

50ns -15/+100ns into 1,000ohm

Source impedance

50ohm

Polarity

Positive/negative

Output

 

Direct

Via 50ohm coaxial connector

Coupling mode

L, N, PE; all combinations

DUT supply

AC: 300V/16A; 50/60Hz

 

DC: 300V/16A

CRO trigger

5V trigger signal for oscilloscope

Interface

 

Serial interface

USB

Parallel interface

IEEE 488, addresses 1 - 30

Analog output

0 - 10VDC to control an external transformer

CN interface

15pin SubD connector to control an external coupling network

Fail inputs

DUT monitoring via Fail1 and Fail2 input (one each)

Dimensions

Dimensions

19", 3HU

Weight

approx. 14kg

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E