»  Categories   »      Solid State Amplifier   »    Microwave Amplifier   »    Low Power Amplifier   »    High Frequency Amplifier   »    Broadband Amplifier   »    Amplifier  

image enlarge

Amplifier Research 80S4G11 Solid State Amplifier 4GHz – 10.6GHz 80W

Description

Amplifier Research 80S4G11 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 80S4G11, when used with a sweep generator, will provide a minimum of 80 watts of RF power instantaneously from 4 to 10.6 GHz.

The Model 80S4G11 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a graphic Liquid Crystal Display, menu assigned softkeys, a single rotary knob, and a dedicated power on/off switch to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status.

Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes. All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet. The bus interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

The Model 80S4G11 is designed to have low spurious signals, linearity and is extremely load tolerant which enables it to be used in many RF applications such as: RF susceptibility testing, antenna/component testing, as well as communication technology testing. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.

The 80S4G11 is part of AR’s Expandable Power concept, which gives the amplifier much more versatility. It consists of four 20S4G11A sub-amplifiers housed in a single equipment rack with a controller. It can function as one amplifier or be separated and operate as four separate 20S4G11A amplifiers which can be used independently.

Features

  • Broadband
  • Solid State  
  • Mismatch Tolerant
  • Modulation Capability
  • Digital Control Panel
  • Automatic Primary Power Selection
  • RF Input Leveling Circuit – Overdrive Protection
  • Over Temperature Protection
  • Standard Remote Interfaces

Specifications

RATED POWER OUTPUT

80 watts minimum

INPUT FOR RATED OUTPUT

1.0 milliwatt maximum, 0 dBm

POWER OUTPUT @ 3dB COMPRESSION

Nominal

85 watts

Minimum

75 watts

POWER OUTPUT @ 1dB COMPRESSION

Nominal

80 watts

Minimum

70 watts

FLATNESS

±2.0 dB typical

±3.0 dB maximum

FREQUENCY RESPONSE

4.0-10.6 GHz instantaneously

GAIN (at maximum setting)

49 dB minimum

GAIN ADJUSTMENT (Continuous Range)

10 dB minimum

INPUT IMPEDANCE

50 ohms, VSWR 2.5:1 maximum

OUTPUT IMPEDANCE

50 ohms, nominal

MISMATCH TOLERANCE

100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.

MODULATION CAPABILITY

Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal

HARMONIC DISTORTION

Minus 20 dBc maximum at 80 watts

THIRD ORDER INTERCEPT POINT

57 dBm typical

RF POWER DISPLAY

Digital, forward, and reflected

PRIMARY POWER

(selected automatically)

90-132, 180-264 VAC

50/60 Hz, single phase

<2200 watts maximum

CONNECTORS

RF INPUT

Type N female on front panel

RF OUTPUT

Type N female on rear panel

External Leveling Inputs

Type BNC female on front panel

Pulse Modulation Input

Type BNC female on front panel

Detected RF Output

Type BNC female on front panel

REMOTE INTERFACES

IEEE-488

24 pin female

RS-232

9 pin Subminiature D (female)

RS-232 (Fiber-optic)

Type ST

USB 2.0

Type B

Ethernet

RJ-45

SAFETY INTERLOCK

15 Pin Subminiature D

COOLING

Forced air (self contained fans)

SIZE (W x H x D)

56.1 x 152.4 x 67.1 cm, 22.1 x 60.0 x 26.4 in

WEIGHT (approximate)

172.4 kg (380 lbs)

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E