POWER (fundamental), CW, @ OUTPUT CONNECTOR

Nominal

40 watts

Minimum

40 watts, 30 watts in low harmonic mode

Linear @ 1dB Compression

10 watts minimum

FLATNESS

±10 dB maximum, 4.2 - 18 GHz

FREQUENCY RESPONSE

4.2-18 GHz instantaneously or one of three selectable sub-bands in low harmonic mode

INPUT FOR RATED OUTPUT

1.0 milliwatt maximum

GAIN (at maximum setting)

46 dB minimum

GAIN ADJUSTMENT (continuous range)

35 dB minimum

INPUT IMPEDANCE

50 ohms, VSWR 2.0:1 maximum

OUTPUT IMPEDANCE

50 ohms, VSWR 2.5:1 typical

MISMATCH TOLERANCE

Output power foldback protection at reflected power exceeding 20 watts (13 watts in low harmonic mode). Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.

MODULATION CAPABILITY

Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.

NOISE POWER DENSITY

Minus 80 dBm/Hz (maximum)

Minus 90 dBm/Hz (typical)

HARMONIC DISTORTION (in user selectable sub-band at 30 watts)

Minus 20 dBc maximum

Minus 30 dBc typical

HARMONIC DISTORTION (full band at 40 watts)

4.2-4.5 GHz; Minus 2.5 dBc maximum, Minus 0 dBc typical

4.5-6.0 GHz; Minus 0.5 dBc maximum, Minus 1 dBc typical

6.0-8.0 GHz; Minus 4 dBc maximum, Minus 6 dBc typical

8.0- 10.0 GHz; Minus 6 dBc maximum, Minus 9 dBc typical

Above 10 GHz; Minus 10 dBc maximum, Minus 15 dBc typical

PRIMARY POWER

99-260 VAC

50/60 Hz single phase

800 VAC maximum

CONNECTORS

RF input

Type N precision female on rear panel

RF output

Type N precision female on rear panel

RF output sample port

Type N precision female on rear panel

GPIB

IEEE-488 (f)

Interlock

DB-15 female on rear panel

COOLING

Forced air (self contained fans), air entry and exit in rear.

SIZE (W x H x D)

50.3 x 26 x 68.6 cm, 19.8 x 10 x 27 in.

WEIGHT (approximate)

39 kg, 85 lbs.