|
For ease and convenience of performing conducted measurements, all of our Current Probes utilize the split type clamp-on design. The BCP-518 is ideally suited to measuring currents for the immunity requirements of DO-160 and IEC-1000-4-6 on large cables. It has a usable frequency range of 10 KHz to 500 MHz Its transfer impedance is typically 13.5 dBW (± 2 dB) from 70 MHz to 400 MHz It has an aperture of 70 mm and can clamp around very large cable bundles. It can operate without saturation from 200 amperes of DC to 400 Hz, 50 amperes of pulse current and 25 amperes of CW.
- Ideally suited for measuring current on large cables
- Individually Calibrated (Transfer Impedance calibration included)
- High Current Capability
- Split Type Clamp-on Design
|
Frequency Range
|
100 kHz - 500 MHz
|
|
Transfer Impedance (dBW)
|
-10 to 15
|
|
Max Primary Current (DC - 400 Hz)
|
200 Amps
|
|
Max RF Current
|
25 Amps
|
|
Max Pulse Current
|
50 Amps
|
|
Connector
|
N-Type, Female
|
A.H. Systems BCP-518 Physical Dimensions
|
Aperture
|
2.7" (70 mm)
|
|
Diameter
|
5.0" (125 mm)
|
|
Weight
|
2.5 lb.'s (1.13 kg)
|
Standards
|
CISPR 11 |
|
CISPR 14 - 1 |
|
CISPR 14 - 2 |
|
CISPR 14 - 2 |
|
CISPR 16 - 1 |
|
CISPR 16 - 2 |
|
CISPR 16 - 3 |
|
CISPR 16 - 4 |
|
CISPR 22 |
|
CISPR 24 |
|
IEC/TR EN 61000 - 1 - 1 |
|
IEC/TR EN 61000 - 2 - 1 |
|
IEC/TR EN 61000 - 2 - 3 |
|
IEC EN 61000 - 3 - 2 |
|
IEC EN 61000 - 3 - 4 |
|
IEC/TC EN 61000 - 3 - 5 |
|
IEC EN 61000 - 4 - 2 |
|
IEC EN 61000 - 4 - 3 |
|
IEC EN 61000 - 4 - 4 |
|
IEC EN 61000 - 4 - 5 |
|
IEC EN 61000 - 4 - 6 |
|
IEC EN 61000 - 4 - 7 |
|
IEC EN 61000 - 4 - 8 |
|
IEC EN 61000 - 4 - 9 |
|
IEC EN 61000 - 4 - 11 |
|
EN 50 081 part 1 |
|
EN 50 081 part 2 |
|
EN 55 011 |
|
EN 55 013 |
|
EN 55 014 |
|
EN 55 015 |
|
EN 55 020 |
|
EN 55 022 |
|
EN 55 024 |
|
EN 50 082 part 1 |
|
EN 50 082 part 2 |
|
EN 50 093 |
|
FCC Part 15 |
|
MIL-STD - 461E |
| 
» 
