»   Categories   »   EMC / EMI

EMC / EMI


Electromagnetic compatibility (EMC) is the branch of electrical sciences which studies the unintentional generation, propagation and reception of electromagnetic energy with reference to the unwanted effects (Electromagnetic interference, or EMI) that such energy may induce. EMC aims to ensure that equipment items or systems will not interfere with or prevent each other's correct operation through spurious emission and absorption of EMI. EMC is sometimes referred to as EMI Control, and in practice EMC and EMI are frequently referred to as a combined term "EMC/EMI".

Filter: 
TESEQ AES 5501 Automotive Emissions Test System for ISO 7637-2
TESEQ AES 5501 Automotive Emissions Test System for ISO 7637-2
The AES 5501 is a system of electronic and mechanical switches, an artificial network, and a unique control station designed for emissions testing to ISO 7637-2. Having gone through meticulous development and intensive beta testing, the AES 5501 cont... View Details >>
TESEQ AMZ 41 Absorbing Clamp
TESEQ AMZ 41 Absorbing Clamp
The absorbing clamp AMZ 41 has been designed for measurement of radio interferences emitted from electrical instruments via their connecting leads. The absorbing clamp measurement method (ACMM) is described in Clause 7 of CISPR 16-2-2. The absorbing ... View Details >>
TESEQ CDN 117 DATA LINE Coupling/Decoupling Network
TESEQ CDN 117 DATA LINE Coupling/Decoupling Network
Teseq’s CDN 117 coupling-decoupling network enables convenient testing with surge pulses of 1.2/50 μs on data, signal or peripheral lines, as specified in many product standards. The test method, severity levels, permissible reaction of th... View Details >>
TESEQ CDN 118 DATA LINE Coupling/Decoupling Network
TESEQ CDN 118 DATA LINE Coupling/Decoupling Network
Teseq’s CDN 118 coupling-decoupling network is designed for convenient surge testing of telecommunications equipment to IEC/EN 61000-4-5, which specifies a 1.2/50 μs or a 10/700 μs pulse. The CDN 118 includes the special decouplin... View Details >>
TESEQ CDN 3043 Three Phase Coupling/Decoupling Network
TESEQ CDN 3043 Three Phase Coupling/Decoupling Network
The CDN 3043 series are three phase coupling/decoupling networks designed to offer best price performance for use as extension to NSG 3040 multifunction generator series. Various models are available in order to cover anyone’s need for best budg... View Details >>
TESEQ CDN 3061 Automated Single Phase Coupling/Decoupling Network
TESEQ CDN 3061 Automated Single Phase Coupling/Decoupling Network
The new, modular CDN 3061 is an easily upgradeable test instruments that maximize the user’s initial investment. Users can select a CDN configuration that fulfills their basic testing needs with the assurance that they can upgrade it to a version t... View Details >>
TESEQ CDN 3063 Automated Three Phase Coupling/Decoupling Network
TESEQ CDN 3063 Automated Three Phase Coupling/Decoupling Network
The new, modular CDN 3063 continue Teseq’s philosophy of designing easily upgradeable test instruments that maximize the user’s initial investment. Users can select a CDN from this series that fulfils their basic testing needs with the assurance ... View Details >>
TESEQ CDN 3083 B100 Manual Coupling/Decoupling Network (Prev. CDN 163)
TESEQ CDN 3083 B100 Manual Coupling/Decoupling Network (Prev. CDN 163)
High frequency pulse signals can result in cross-talk between conductors running in parallel even over short distances. This behavior is taken into account in the latest and currently valid edition of the EFT/burst standard IEC/EN 61000-4-4 (2004). O... View Details >>
TESEQ CDN 3083 B200 Manual Coupling/Decoupling Network
TESEQ CDN 3083 B200 Manual Coupling/Decoupling Network
The CDN 3083-B200 is a 3-phase burst pulse coupling decoupling network intended to allow EFT/Burst testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications. The CDN 3083-B200... View Details >>
TESEQ CDN 3083 S100M Manual Surge Coupling/Decoupling Network
TESEQ CDN 3083 S100M Manual Surge Coupling/Decoupling Network
The CDN 3083 manual coupling/decoupling network fulfills the requirements specified in the surge standard IEC/EN 61000-4-5: 2005, including the reduced fi lter inductances for EUT currents >25 A per phase. Designed for convenient use in a wide ... View Details >>
TESEQ CDN 3425 Burst/EFT Capacitive Coupling Clamp
TESEQ CDN 3425 Burst/EFT Capacitive Coupling Clamp
The CDN 3425 is Teseq’s newly designed Burst EFT coupling clamp. It replaces the earlier models CDN 8014 and CDN 8015. The CDN 3425’s main purpose is to couple Burst/EFT pulses to data lines. It can also be used to couple to mains lines where ... View Details >>
TESEQ CDN HSS-2 Coupling Decoupling Network
TESEQ CDN HSS-2 Coupling Decoupling Network
The Coupling Decoupling Network CDN HSS-2 is designed for convenient surge testing with 1.2/50 μs pulses, as defined in IEC/EN 61000-4-5, on unshielded symmetrical high speed telecommunication lines e.g. Ethernet. Coupling modes to 1, 2 or 4... View Details >>
TESEQ CHA 9652B Dual Directional Coupler 80 MHz – 1 GHz
TESEQ CHA 9652B Dual Directional Coupler 80 MHz – 1 GHz
Radiated immunity systems require the accurate monitoring of forward and reflected power levels into antennas or other transducers. This high power dual directional coupler has been specifically designed for EMC immunity applications.... View Details >>
TESEQ CIP 9136A Current Injection Probe 10 kHz – 400 MHz
TESEQ CIP 9136A Current Injection Probe 10 kHz – 400 MHz
The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ. It meets the requirements for HIRF testing where conventional ferrite core material cannot handle the higher powers required (up to 1000 W), without changin... View Details >>
TESEQ CMAD 10 Common Mode Absorption Device
TESEQ CMAD 10 Common Mode Absorption Device
Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions. The key parameter is the asymmetrical impedance (common-mode impedance) which can b... View Details >>
TESEQ CMAD 20A Common Mode Absorption Device
TESEQ CMAD 20A Common Mode Absorption Device
Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions. The key parameter is the asymmetrical impedance (common-mode impedance) which can b... View Details >>
TESEQ CSP 9160 EMC Emission/Immunity Sensing Probe
TESEQ CSP 9160 EMC Emission/Immunity Sensing Probe
The CSP 9160 is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic app... View Details >>
TESEQ CVP 2200A Capacitive Voltage Probe
TESEQ CVP 2200A Capacitive Voltage Probe
The Capacitive Voltage Probe (CVP) is designed for measuring asymmetrical disturbances on cables with capacitive coupling principle. It gives the opportunity to do the measuring without disconnection of the tested cable (“in-situ”) and it avoids ... View Details >>
TESEQ DC LISN M2-100 Dual-Line LISN for GCPC
TESEQ DC LISN M2-100 Dual-Line LISN for GCPC
Teseq introduces a new Line Impedance Stabilization Network (LISN) for conducted emissions testing of Grid Connected Power Conditioners (GCPC). The DC-LISN-M2-100 is designed for measuring disturbances on DC power ports in the frequency range from 15... View Details >>
TESEQ DC LISN M2-25-V2 Dual-Line LISN for GCPC
TESEQ DC LISN M2-25-V2 Dual-Line LISN for GCPC
Teseq introduces a new Line Impedance Stabilization Network (LISN) for conducted emissions testing of Grid Connected Power Conditioners (GCPC). The DC-LISN-M2-25-V2 is designed for measuring disturbances on DC power ports in the frequency range from ... View Details >>
TESEQ DCP 0100A Dual Directional Coupler 10 kHz – 1 GHz
TESEQ DCP 0100A Dual Directional Coupler 10 kHz – 1 GHz
BCI and radiated immunity systems require the accurate monitoring of forward and reflected power levels into clamps, antennas or other transducers. This high power dual directional coupler has been specifically designed for EMC immunity applications.... View Details >>
TESEQ DTEM TEM Cell for Emissions and Immunity Testing
TESEQ DTEM TEM Cell for Emissions and Immunity Testing
The transversal electromagnetic mode which can developed in the DTEM cell, provides the opportunity for doing EMC testing inside the cell. In principle, the DTEM cell is a coaxial line expanding rectangularly and with planar septum. The geometrical d... View Details >>
TESEQ GTEM 1000 GTEM Cell for Emissions and Immunity Testing
TESEQ GTEM 1000 GTEM Cell for Emissions and Immunity Testing
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster wi... View Details >>
TESEQ GTEM 1250 GTEM Cell for Emissions and Immunity Testing
TESEQ GTEM 1250 GTEM Cell for Emissions and Immunity Testing
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster wi... View Details >>
TESEQ GTEM 1500 GTEM Cell for Emissions and Immunity Testing
TESEQ GTEM 1500 GTEM Cell for Emissions and Immunity Testing
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster wi... View Details >>
TESEQ GTEM 1750 GTEM Cell for Emissions and Immunity Testing
TESEQ GTEM 1750 GTEM Cell for Emissions and Immunity Testing
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster wi... View Details >>
TESEQ GTEM 2000 GTEM Cell for Emissions and Immunity Testing
TESEQ GTEM 2000 GTEM Cell for Emissions and Immunity Testing
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster wi... View Details >>
TESEQ GTEM 250 GTEM Cell for Emissions and Immunity Testing
TESEQ GTEM 250 GTEM Cell for Emissions and Immunity Testing
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster wi... View Details >>
TESEQ GTEM 250A-SAE Test Cell for SAE 1752/3 IEC 62132-2 & 61967-2
TESEQ GTEM 250A-SAE Test Cell for SAE 1752/3 IEC 62132-2 & 61967-2
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster with h... View Details >>
TESEQ GTEM 250A-V Test Cell for Electro Acoustics – IEC 60118-13
TESEQ GTEM 250A-V Test Cell for Electro Acoustics – IEC 60118-13
A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster with h... View Details >>

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E