EMC / EMI

Electromagnetic compatibility (EMC) is the branch of electrical sciences which studies the unintentional generation, propagation and reception of electromagnetic energy with reference to the unwanted effects (Electromagnetic interference, or EMI) that such energy may induce. EMC aims to ensure that equipment items or systems will not interfere with or prevent each other's correct operation through spurious emission and absorption of EMI. EMC is sometimes referred to as EMI Control, and in practice EMC and EMI are frequently referred to as a combined term "EMC/EMI".

• Absorbing Clamp
• Automotive
• CDN
• Current Injection Probe
• Current Probe
• Dips & Interrupts
• Directional Coupler
• E & H Field
• EM Clamp
• GTEM/TEM Cell
• Harmonics & Flicker
• Low Noise Amplifier
• Magnetic Field Test
• Near Field Probe Set
• Power Meter
• Reference Source
• RF Switch Network
• Telecommunication
• Voltage Probe

Filter: 

[show all brands] Agilent TechnologiesA.H. SystemsAmplifier ResearchCom-PowerEmcoEmc-PartnerETS-LindgrenRohde & SchwarzSolar ElectronicsTESEQZES ZimmerNoiseKenEM TESTAE TechronHaefely Technology EMC

ETS-Lindgren HI-4433-LFH Magnetic Field Probe 300 kHz – 30 MHz The HI-4433 series probes feature Automatic Continuous Zeroing. This Automatic Continuous Zeroing feature removes the need for internal zero adjustment and eliminates temperature drift errors associated with other instrumentation. The Automatic Z... View Details >>

ETS-Lindgren HI-4433-MSE Electric Field Probe 500 kHz – 5 GHz The HI-4433 series probes feature Automatic Continuous Zeroing. This Automatic Continuous Zeroing feature removes the need for internal zero adjustment and eliminates temperature drift errors associated with other instrumentation. The Automatic Ze... View Details >>

ETS-Lindgren HI-4433-STE Electric Field Probe 500 kHz – 5 GHz The HI-4433 series probes feature Automatic Continuous Zeroing. This Automatic Continuous Zeroing feature removes the need for internal zero adjustment and eliminates temperature drift errors associated with other instrumentation. The Automatic Ze... View Details >>

ETS-Lindgren HI-6005 Electric Field Probe 100 kHz – 6 GHz The battery-powered HI-6005 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6005 can read data continuously over the entire dynamic r... View Details >>

ETS-Lindgren HI-6022 Electric Field Probe 10 kHz – 1 GHz The battery-powered HI-6022 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6022 can read data continuously over the entire dynamic r... View Details >>

ETS-Lindgren HI-6053 Electric Field Probe 10 MHz – 40 GHz The battery-powered HI-6053 Electric Field Probe provides broadband frequency coverage and wide dynamic range that satisfies the demands of most test requirements. To take advantage of this capability, the HI-6053 was designed to be single range read... View Details >>

ETS-Lindgren HI-6100 EMF Field Monitor The ETS-Lindgren Holaday EMF Model HI-6100 Field Monitor Readout Unit provides measurement display, control and alarm functions for up to four ETS-Lindgren Holaday EMF probes (available separately). The Model HI-6100 Readout Unit includes IEEE-488... View Details >>

ETS-Lindgren HI-6105 Electric Field Probe 100 kHz – 6 GHz The laser-powered HI-6105 Electric Field Probe embodies the latest innovations in isotropic sensor design and low noise, miniaturized electronics. Designed to be single range reading, the HI-6105 can read data continuously over the entire dynamic ran... View Details >>

ETS-Lindgren HI-6122 Electric Field Probe 10 kHz – 1 GHz The laser powered HI-6122 EMF Field Probe provides broadband EMF frequency coverage and wide dynamic range that satisfies the demands of most test requirements. To take advantage of this capability, the HI-6122 was designed to be single range reading... View Details >>

ETS-Lindgren HI-6153 Electric Field Probe 10 MHz – 40 GHz The laser powered HI-6153 Electric Field Probe provides broadband EMF frequency coverage and wide dynamic range that satisfies the demands of most test requirements. To take advantage of this capability, the HI-6153 was designed to be single range re... View Details >>

ETS-Lindgren MF-130D RF Test Set The RF Attenuation Meter MF-130D was designed to simplify the checking of the performance of a shielded enclosure. With the possibility of generating eight frequencies, the engineer is able to check the shielding effectiveness very quickly. The me... View Details >>

Haefely AXOS 5 Compact Immunity Test System The new AXOS5 compact immunity test system integrates all of the best features of our stand alone test systems into one single economic solution. It combines 5 kV Burst/EFT, Surge combination wave, AC/DC Dips & Interrupts, along with an integrate... View Details >>

Haefely DEC 5 Decoupling Network Symmetrical Data & Control Lines The DEC 5 is used for decoupling auxiliary equipment from an EUT tested with either 1,2/50ms - 8/20ms combination wave impulses or 10/700ms impulses up to 6.6kV peak. It is used to decouple unshielded symmetrical data and signal lines according stand... View Details >>

Haefely DEC 6 Decoupling Network Symmetrical Data & Control Lines The DEC 6 is used for decoupling auxiliary equipment from a EUT tested with 10/700us impulses up to 6.6kV peak. It is used to decouple unshielded symmetrical data and signal lines according standard ITU K.44. Up to 4 wires can be tested simultaneousl... View Details >>

Haefely DEC 7 Decoupling Network Asymmetrical Data & Control Lines The DEC 7 is used for decoupling auxiliary equipment from an EUT tested with either 1,2/50ms- 8/20ms combination wave impulses or ring wave 100kHz impulses up to 6.6kV peak. It is used to decouple unshielded asymmetrical control and data lines accord... View Details >>

Haefely ECOMPACT 4 Compact Transient Immunity Test System 4.2kV The ECOMPACT 4 is an ultra-compact immunity tester that performs all the most commonly used transient immunity tests, including Surge, EFT, Dips/Interrupts and AC/Surge Magnetic Field. The simplified user interface provides quick selection of tests a... View Details >>

Haefely ECOUPLER 4 Coupling / Decoupling Network for ECOOMPACT 4 The ECOUPLER 4 is an ultra-compact coupling and decoupling network for burst and surge coupling onto three-phase power lines. ECOUPLER 4 can be controlled manually from its front panel or automatically from the PC, using the EMV Check software enclos... View Details >>

Haefely EFT Verification Set EFT/Burst generators are verified according to the standard IEC/EN 61000-4-4 Edition 2. Measurements of individual impulse parameters are performed using a termination to match the EFT/Burst generator output impedance (50W) and a voltage divider to r... View Details >>

Haefely FP-EFT 100M2 Manual 3 Phase CDN for EFT / Burst 100A IEC / EN and ANSI standards cover burst testing of single and three phase AC and DC power ports. They include recommendations for the test equipment, the test set-ups and the test procedures. The IEC 61000-4-4 Edition 2: 2004 now defines the impulse ... View Details >>

Haefely FP-EFT 32M Manual 3 Phase CDN for EFT / Burst 32A IEC / EN and ANSI standards cover burst testing of single and three phase AC and DC power ports. They include recommendations for the test equipment, the test set-ups and the test procedures. The IEC 61000-4-4 Edition 2: 2004 now defines the impulse ... View Details >>

Haefely MAG 100 Power Frequency Magnetic Field Test Equipment To be used for EMC Tests requiring AC Magnetic Fields. MAG 100 has a 1m x 1m square, single turn antenna. A current of 120A is needed to feed the coil to produce a field of 100A/m. MAG 100 includes a current transformer capable of delivering 120A... View Details >>

Haefely MFS 100 Power Frequency & Pulse Magnetic Field Test System The MFS 100 test system can be used to test power frequency magnetic fields according to IEC/EN 61000-4-8 and pulse magnetic field according to IEC/EN 61000-4-9. The MFS 100 is an accessory to either the PSURGE 4010, PSURGE 8000 with PIM 100 surge... View Details >>

Haefely MSURGE Magnetic Impulse Field Test System To be used for EMC Tests requiring impulse Magnetic Fields. The MSURGE is an accessory to either the PSURGE 4010 or PSURGE 8000 with PIM 100 surge generators. It enables magnetic field testing up to 3000 A/m as required by IEC 61000-4-9. The su... View Details >>

Haefely PCD 100 Single Phase CDN for PSURGE 8000 Platform IEC and EN standards cover testing of single phase AC mains and DC power ports. They include recommendations for coupling and decoupling characteristics. These recommendations are based on the European model for ac power lines. The PCD 100 also fu... View Details >>

Haefely PCD 120 & PIM 120 10/700us Test System To test telecom systems the 10/700us impulse also called telecom impulse is used. This impulse is characterized by high energy and a relative fast rise time. The 10/700us test system includes with the impulse module PIM 120 and the automatic coupl... View Details >>

Haefely PCD 121 Coupling Network Symmetrical Data & Control Lines The PCD 121 is used for coupling of 1, 2/50us - 8/20us combination wave impulses up to 6.6kV peak onto unshielded symmetrical data and signal lines according IEC/EN standards. Up to 2 pairs / 4 wires can be tested simultaneously. To obtain maximum... View Details >>

Haefely PCD 122 Coupling Network Symmetrical Data & Control Lines The PCD 122 is used for coupling of 10/700ms impulses up to 6.6kV peak onto unshielded symmetrical data and signal lines according IEC/EN and ITU standards. Up to 2 pairs / 4 wires can be tested simultaneously. To obtain maximum flexibility only c... View Details >>

Haefely PCD 126A CDN Asymmetrical & Symmetrical Lines The PCD 126A is used for surge coupling of 1,2/50us - 8/20us combination wave impulses onto unshielded asymmetrical data and signal lines according IEC/EN standards. It is also used for surge coupling ring wave impulses onto both unshielded asymmetri... View Details >>

Haefely PCD 130 Three Phase CDN for PSURGE 8000 Platform IEC and EN standards cover testing of 3 phase AC and DC power ports. They include recommendations for the coupling and decoupling component values within the CDN. These values are largely based on the European model for AC power lines. PCD 130 includ... View Details >>

Haefely PCD 150 CDN for Data & Control Lines The PCD 150 is used for surge coupling onto unshielded data- and signal lines according to IEC/EN standards. Damped oscillatory waves with both 100kHz and 1MHz up to 3.3kV peak as well as ring wave 100kHz with Z=200 Ohm up to 4.4kV peak can be couple... View Details >>