»   Categories   »   EFT/Burst Generator

EFT/Burst Generator


Filter: 
EM TEST EFT 500N5 Electrical Fast Transient Generator 4.8kV
EM TEST EFT 500N5 Electrical Fast Transient Generator 4.8kV
The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp. The spike frequency can be varied... View Details >>
EM TEST EFT 500N8 Electrical Fast Transient Generator 7kV
EM TEST EFT 500N8 Electrical Fast Transient Generator 7kV
The EFT 500N8 is the state-of-the-art EFT/Burst tester with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp. The spike frequency can be varied from as ... View Details >>
EM TEST UCS 200N Series Automotive Transient Simulator
EM TEST UCS 200N Series Automotive Transient Simulator
The UCS 200N Ultra-Compact Simulator series for Automotive Transients unifies the capabilities of an EFT/Burst simulator, a Micropulse simulator and the required coupling network into one box. The UCS 200N series is equipped to meet all international... View Details >>
EM TEST UCS 500N5 Multifunctional Test Generator for Transients 5.5kV
EM TEST UCS 500N5 Multifunctional Test Generator for Transients 5.5kV
The UCS 500N5 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/product family standards. The UCS 500N5 is the most econo... View Details >>
EM TEST UCS 500N5E EFT/Burst Generator for Transients 5.5kV
EM TEST UCS 500N5E EFT/Burst Generator for Transients 5.5kV
The UCS 500N5E is a new dedicated EFT/Burst generator based on the successful UCS 500N series of ultra-compact simulators. Offering all the benefits of the well-known UCS 500N5 it is designed as a Burst generator only. This makes it the full performi... View Details >>
EM TEST UCS 500N7 Multifunctional Test Generator for Transients 7kV
EM TEST UCS 500N7 Multifunctional Test Generator for Transients 7kV
The UCS 500N7 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/ product family standards with voltage capability of up t... View Details >>
EM TEST UCS 500N7.2 Multifunctional Transient Simulator
EM TEST UCS 500N7.2 Multifunctional Transient Simulator
The UCS 500N7.2 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/ product family standards with voltage capability of up... View Details >>
Haefely AXOS 5 Compact Immunity Test System
Haefely AXOS 5 Compact Immunity Test System
The new AXOS5 compact immunity test system integrates all of the best features of our stand alone test systems into one single economic solution. It combines 5 kV Burst/EFT, Surge combination wave, AC/DC Dips & Interrupts, along with an integrate... View Details >>
Haefely ECOMPACT 4 Compact Transient Immunity Test System 4.2kV
Haefely ECOMPACT 4 Compact Transient Immunity Test System 4.2kV
The ECOMPACT 4 is an ultra-compact immunity tester that performs all the most commonly used transient immunity tests, including Surge, EFT, Dips/Interrupts and AC/Surge Magnetic Field. The simplified user interface provides quick selection of tests a... View Details >>
Haefely ECOUPLER 4 Coupling / Decoupling Network for ECOOMPACT 4
Haefely ECOUPLER 4 Coupling / Decoupling Network for ECOOMPACT 4
The ECOUPLER 4 is an ultra-compact coupling and decoupling network for burst and surge coupling onto three-phase power lines. ECOUPLER 4 can be controlled manually from its front panel or automatically from the PC, using the EMV Check software enclos... View Details >>
Haefely EFT Verification Set
Haefely EFT Verification Set
EFT/Burst generators are verified according to the standard IEC/EN 61000-4-4 Edition 2. Measurements of individual impulse parameters are performed using a termination to match the EFT/Burst generator output impedance (50W) and a voltage divider to r... View Details >>
Haefely PCD 120 & PIM 120 10/700us Test System
Haefely PCD 120 & PIM 120 10/700us Test System
To test telecom systems the 10/700us impulse also called telecom impulse is used. This impulse is characterized by high energy and a relative fast rise time. The 10/700us test system includes with the impulse module PIM 120 and the automatic coupl... View Details >>
Haefely PEFT 4010 Burst Test System per IEC/EN 61000-4-4 Ed. 1 & 2
Haefely PEFT 4010 Burst Test System per IEC/EN 61000-4-4 Ed. 1 & 2
The PEFT 4010 instrument contains all the features expected from a top quality EFT generator. Unbeaten performances paired with a high end assembly guarantee a cost effective, long-lasting investment and valuable test results. Electrical fast tra... View Details >>
Haefely PEFT 8010 Burst Test System IEC/EN 61000-4-4 Ed. 1&2 7.3kV
Haefely PEFT 8010 Burst Test System IEC/EN 61000-4-4 Ed. 1&2 7.3kV
Electrical fast transients (EFT) are the most popular sources of disturbances in modern electronic circuits. EFT/bursts are caused by the operation of electro-mechanical switches, motors or power distribution switchgears. The PEFT 8010 instrument ... View Details >>
Haefely PIM 100 1.2/50us & 8/20us Combination Wave Impulse Module
Haefely PIM 100 1.2/50us & 8/20us Combination Wave Impulse Module
IEC 61000-4-5 and ANSI C62.41 describe a combination Wave or Hybrid generator with defined open AND short circuit waveforms. The Combination Wave is used to test AC and DC power systems. Safety is paramount with surge impulses. The PIM 100 High Vo... View Details >>
Haefely PIM 110 0.5us - 100 kHz Ring Wave Impulse Module
Haefely PIM 110 0.5us - 100 kHz Ring Wave Impulse Module
IEC 61000-4-12 and ANSI C62.41 describe a Ring Wave generator for application on power lines in a protected environment. ANSI C62.41 specifies the ring wave for testing products situated in Location Category A and B. The standard differentiates betwe... View Details >>
Haefely PIM 120 & PCD 120 10/700us Test System
Haefely PIM 120 & PCD 120 10/700us Test System
To test telecom systems the 10/700us impulse also called telecom impulse is used. This impulse is characterized by high energy and a relative fast rise time. The 10/700us test system includes with the impulse module PIM 120 and the automatic coupl... View Details >>
Haefely PIM 130 1.2/50us Voltage Impulse Module
Haefely PIM 130 1.2/50us Voltage Impulse Module
Electric Strength and transient level tests are made to ensure the safety of operating personnel. Such tests can be performed with the PIM 130. Safety of Information Technology Equipment is covered in standards IEC 60950 and UL 1950; both of them ... View Details >>
Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Module
Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Module
IEC 61000-4-12 and ANSI C37.90 describe an oscillating wave generator with defined open circuit waveforms parameters. The oscillating wave, also called a “damped sine” is used to test the immunity of electronic relays and relay systems mounted in... View Details >>
Haefely PIM 155 100 kHz & 1 MHz Oscillating Magnetic Field Module
Haefely PIM 155 100 kHz & 1 MHz Oscillating Magnetic Field Module
IEC 61000-4-10 describe an oscillating magnetic field generator. The oscillating magnetic field is used to test the immunity of electronic equipment to be installed in high voltage sub-stations. Safety is paramount when AC and impulse voltages are... View Details >>
Haefely PIM 200 8/20µs & 10/1000µs Current Module
Haefely PIM 200 8/20µs & 10/1000µs Current Module
The PIM200 is used for component testing with impulse currents. For testing overvoltage protection elements such as varistors, gas arrestors and avalanche breakdown diodes with clamping voltages up to 3kV. Both impulses shapes 8/20µs and 10/... View Details >>
Haefely PIM 210 8/20µs & 10/1000µs Current Module
Haefely PIM 210 8/20µs & 10/1000µs Current Module
The PIM 210 is used for component testing with current impulses. For testing overvoltage protection elements such as varistors and avalanche breakdown diodes with clamping voltages up to 3kV. Both impulse shapes 8/20µs and 10/1000µs a... View Details >>
Haefely PSURGE 30.2 Modular 30kV / 30kA Surge Test System
Haefely PSURGE 30.2 Modular 30kV / 30kA Surge Test System
This test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge is characterized by high energy and relative fast front times. Pulse durations are widely variable as are the... View Details >>
Haefely PSURGE 8000 Surge Platform Test System
Haefely PSURGE 8000 Surge Platform Test System
This system meets ALL your current and future Surge Testing requirements! A modular expandable system that grows with your application needs. The modular concept is built around a PC based host controller (the PSURGE 8000 Controller) with physica... View Details >>
Haefely VTM 15000 Impulse Transformer for Insulation Testing
Haefely VTM 15000 Impulse Transformer for Insulation Testing
The VTM 15000 is used for insulation testing with 1.2/50us voltage impulses. The VTM 15000 runs together with a combination wave generator such as PIM 100 or PSURGE 4010. The output voltage of the generator is doubled; the voltage wave shape remai... View Details >>
Tektronix AFG310 16 MHz Arbitrary Waveform/Function Generator
Tektronix AFG310 16 MHz Arbitrary Waveform/Function Generator
The AFG300 Series is an excellent 16 MHz function generator with built-in arbitrary waveform, burst, sweep, and modulation capabilities. The instruments support standard waveforms including sine, square, triangle, ramp, pulse, DC and noise. Its sweep... View Details >>
TESEQ NSG 1025 Fast Transient/Burst Generator
TESEQ NSG 1025 Fast Transient/Burst Generator
Standards such as the IEC 801-4, DIN/VDE 0843-4 . CENELEC HD 481 .4, etc. call for interference voltage tests to be carried out on instruments and systems using pulse bursts similar to those that occur in practice when electrical equipment is switche... View Details >>
TESEQ NSG 3025 Burst Generator 4.8 kV
TESEQ NSG 3025 Burst Generator 4.8 kV
The compact NSG 3025 is fully capable of running standard tests to EN 61000-4-4, IEC 61000-4-4, etc. as well as handling tests to both product and company standards. It has been designed for certification, development laboratory and on-site purposes.... View Details >>
TESEQ NSG 3040 Multi-Function Generator System 4 kV Solution
TESEQ NSG 3040 Multi-Function Generator System 4 kV Solution
Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.... View Details >>
TESEQ NSG 3040-EFT Single Function Generator System 4.8 kV Solution
TESEQ NSG 3040-EFT Single Function Generator System 4.8 kV Solution
Teseq’s new NSG 3040-EFT is an easy-to-use single function generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN stan... View Details >>

Standards

CISPR
CISPR 11
CISPR 14 - 1
CISPR 14 - 2
CISPR 14 - 2
CISPR 16 - 1
CISPR 16 - 2
CISPR 16 - 3
CISPR 16 - 4
CISPR 22
CISPR 24
IEC
IEC/TR EN 61000 - 1 - 1
IEC/TR EN 61000 - 2 - 1
IEC/TR EN 61000 - 2 - 3
IEC EN 61000 - 3 - 2
IEC EN 61000 - 3 - 4
IEC/TC EN 61000 - 3 - 5
IEC EN 61000 - 4 - 2
IEC EN 61000 - 4 - 3
IEC EN 61000 - 4 - 4
IEC EN 61000 - 4 - 5
IEC EN 61000 - 4 - 6
IEC EN 61000 - 4 - 7
IEC EN 61000 - 4 - 8
IEC EN 61000 - 4 - 9
IEC EN 61000 - 4 - 11
European
EN 50 081 part 1
EN 50 081 part 2
EN 55 011
EN 55 013
EN 55 014
EN 55 015
EN 55 020
EN 55 022
EN 55 024
EN 50 082 part 1
EN 50 082 part 2
EN 50 093
American
FCC Part 15
MIL-STD - 461E